VMware Cloud Community
Gabrie1
Commander
Commander
Jump to solution

Internal copy speed from LUN to LUN

Hi

I had a VM with two vmdks, each on a different LUN. I decided to migrate the VM to the ESX host it was already running on and choose the option to move the configuration and disk files. I only made it move the 2nd vmdk from LUN 001 to LUN 003. This vmdk is about 100Gb and its taking almost an hour now.

When looking at esxtop on the esx host I see the following:

ADAPTR CID TID LID WID NCHNS NTGTS NLUNS NVMS SHARES AQLEN LQLEN WQLEN ACTV QUED %USD LOAD CMDS/s READS/s WRITES/s MBREAD/s MBWRTN/s

vmhba0 - - - - 1 1 1 1 1000 128 0 0 0 0 0 0.00 3.97 0.00 3.97 0.00 0.04

vmhba1 - - - - 1 1 6 12 12000 4096 0 0 1 0 0 0.00 451.69 222.81 228.88 27.85 27.88

vmhba2 - - - - 1 1 0 0 0 4096 0 0 0 0 0 0.00 0.00 0.00 0.00 0.00 0.00

Can someone tell me if the 27.85 MBRead/S and MBWRTN/S is a good speed? We're connected through FC to a IBM SVC SAN. There is almost no load on the ESX host.

Gabrie

http://www.GabesVirtualWorld.com
Reply
0 Kudos
1 Solution

Accepted Solutions
christianZ
Champion
Champion
Jump to solution

30 MB/sek, I can reach it too, don't think that's bad.

View solution in original post

Reply
0 Kudos
6 Replies
MR-T
Immortal
Immortal
Jump to solution

I've just completed the exact same thing and I only managed 12.xx for MBREAD and MBWRITE.

I'm moving about 16GB of vmdk from one LUN to another.

christianZ
Champion
Champion
Jump to solution

30 MB/sek, I can reach it too, don't think that's bad.

Reply
0 Kudos
Gabrie1
Commander
Commander
Jump to solution

Thank you both

It gives me a good idea about the performance !!

Thx

http://www.GabesVirtualWorld.com
Reply
0 Kudos
Chris01
Contributor
Contributor
Jump to solution

How did you get to see the transfer data via esxtop?

I do not get that view, just CPU data.

Reply
0 Kudos
Gabrie1
Commander
Commander
Jump to solution

HI

When running esxtop you press n for network, d for disk, h for help Smiley Happy

Gabrie

http://www.GabesVirtualWorld.com
Reply
0 Kudos
kharbin
Commander
Commander
Jump to solution

Since you are doing a LUN to LUN copy, you are copying the data to the ESX host at 27.85MB/sec, then copying from ESX host to new LUN at 27.88MB/sec for a total throughput of 55.73MB/sec across your FC. While not blazing speed (slower than local storage actually), its usable. I don't think you'll squeeze much more out of that model SAN.

But anyway, 27.85MB/sec translates to about 97.91GB/hour, so it shoudl be done soon.

my 2 cents

Ken Harbin

www.esXpress.com

Reply
0 Kudos