I am in the middle of setting up Netapp FAS2020 to a new 3.5 (update 1) VMware environment using qlogical 4052c hbas. I noticed in /var/log/vmkwaring that the log is filling with the following messages. Everything seems to be working ok now, I am just wondering if this is something I should be concerned about going forward. This message happens everytime I rescan the hba. Should I open a support call?
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.462 cpu3:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba0:288:0
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.462 cpu3:1041)WARNING: SCSI: 1249: LegacyMP Plugin could not claim path: vmhba0:288:0. Not supported
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.462 cpu3:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba0:C0:T288:L0'.Skipping the path.
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.464 cpu3:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba0:288:0
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.464 cpu3:1041)WARNING: SCSI: 1249: LegacyMP Plugin could not claim path: vmhba0:288:0. Not supported
May 2 08:53:45 BUF-ESX-004 vmkernel: 3:00:13:10.464 cpu3:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba0:C0:T288:L0'.Skipping the path.
I do have 2 controller on the FAS2020 and have fixed paths on each hba port to a controller.
