VMware Cloud Community
ejward
Expert
Expert
Jump to solution

Report on SAN disk attached

Our storage department has just assigned a few LUNs to our ESX servers. It does not appear to be configured correctly. We use an EMC DMX back end through a Connectrix switch. In the Windows world, when LUN assignments don't go right, they have me run an INQ report from the Windows server (example below). INQ.EXE is installed with the EMC Control Center software on the server. They want me to run this report on the ESX server. Is there something in ESX that would give me similar information? EMC doesn't seem to know.

Inquiry utility, Version X7.3-532 (Rev 1.0) (SIL Version X5.4.1.0 (Edi

el 532)

Copyright (C) by EMC Corporation, all rights reserved.

For help type inq -h.

....

\----


DEVICE :VEND :PROD :REV :SER NUM :CAP(kb)

\----



.\PHYSICALDRIVE0 :DELL :PERC 5/i :1.00 :---- : \-----


.\PHYSICALDRIVE1 :EMC :SYMMETRIX :5670 :11000000 : 23040


.\PHYSICALDRIVE2 :EMC :SYMMETRIX :5670 :11E1A000 :318193920


.\PHYSICALDRIVE3 :Dell :Virtual Floppy :123 :---- : \-----

Reply
0 Kudos
1 Solution

Accepted Solutions
bister
Expert
Expert
Jump to solution

you could try "esxcfg-mpath -q" from the COS as root.

View solution in original post

Reply
0 Kudos
1 Reply
bister
Expert
Expert
Jump to solution

you could try "esxcfg-mpath -q" from the COS as root.

Reply
0 Kudos