Hi Guys.. I've installed a ESX 3.0 Server . Its pinging and am able to putty my ESX, but not able to access using either VI or webAccess. If i am trying trough web getting error " Page cannot display" if through VI or trying to add in VC ,getting error "Unable to access the specified host, it either does not exist, the server is not responding or there is a network problem " . I have also a SAN Storage in same Class IP address it's Pinging & able access through Web Page But not ESX.. I have checked the Firewall no Port Blocking there........Please help
thnkx for the replying...yes i was already tryied to open telnet on port 902, it shows like that "220 VMware Authentication Daemon Version 1.10: SSL Required, ServerDaemonProtoco l:SOAP, MKSDisplayProtocol:VNC" and nothng else..still not abel to excess through web page. plz help me out
Restart the management services.
service mgmt-vmware restart
service vmware-webAccess restart
If the problem persists, edit the hosts file.
1. type: vi /etc/hosts
2. Press Enter.
3. From the editor, press i
4. Modify the file to resemble the following sample:
Do not remove the following line, or various programs
that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.0.100 hostname.domain.com hostname
5. Press ESC.
6. Type wq! Press Enter.
7. Type service vmware-webAccess restart . Press Enter.
see if you can connect to Web Access
I have tried all the things but problem has been same, while axcess through web acess, it goes to internet automatically. while my another openSAN storage is workjing in wen browser..
& Through Telnet probem han been Same >>>>>Connecting To 192.168.1.200...Could not open connection to the host, on port 443
: Connect failed
Help me out guys:-(
somewehere you have a firewall blocking on port 443. your port 902 works fine which means that you can connect to your ESX with the VI client but you won't be able to acces via WEB ssl on port 443.
For connecting to Vi we need 903 port open
For Web access we need 443 port to be open
Can you please send me the output of the commands
Just a quick - have you restarted the host ones after installation and checked .
Also send me the out put of command
Hello Amit, thnkx for the cmd"luk into the below result of both the command.
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 200 packets, 25136 bytes) pkts bytes target prot opt in out source destination
Incoming and outgoing ports blocked by default. Enabled services: CIMSLP CIMHttpsServer vpxHeartbeats AAMClient LicenseClient ss hServer CIMHttpServer
Stop the Firewall on esx server and see if you are able to connect ..
Service firewall stop
service mgmt-vmware restart
See if that works...
Please also confirm me about SSL Cert. installed
To understand the issue more, have you made any chages in the ESX server after installation.
Can you also let me know if you have made any network configuration changes?
And on the first try can you try to restar the hostd.
service mgmt-vmware status, I know you have restarted the service, but this might be stopiing on background, so check the status.
also, service vmware-vpxa status, if the server has this, this service usually comes after adding the server to VC.