Hi Community
Well We have just brought new DELL 2950 Server , with following Hard/w Config.
750GB x 6 SAS Disk , RAID 10 configured.
2 x 2.83 Quad Core Xeon Processor
32 GB RAM
we have installed ESXi 4.0 , and use the client vSphere for Managing host , our problem is when we try to add "datastore " it always shows only 45GB space available , while Storage contoller shows correct disk size as 2.0T , we have tried rescanning and refershing the controller and Disks , but nothing helps ,
Any suggestion on how should we make our 2.0T disk as available space for DATASTORE ? Please see atacched JPG for problem
Regards & Thanks
Server_Sap
With PERC controller you can create several Logical Disk inside your RAID5 container.
Be sure that each "disk" is < 2TB.
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
Welcome to the forums,
The partition you created is over 2TB in size which is the limit for ESX. I would advise to create multiple smaller volumes. for instance 4 x 512GB or 2 x 1TB.
Duncan
VMware Communities User Moderator | VCP | VCDX
-
If you find this information useful, please award points for "correct" or "helpful".
With PERC controller you can create several Logical Disk inside your RAID5 container.
Be sure that each "disk" is < 2TB.
Andre
**if you found this or any other answer useful please consider allocating points for helpful or correct answers
i have checked with dell support web site .Dell 2950 server is maximun support disk Max internal Storage 1.8 TB . Please you can creat disk 1 TB
Hey All,
Thanks for suggesting , i am creating now 3 Virtual Disk from Perc contoler configuration , then i will try reinstalling ESXi 4 , will let you know soon .
Regards
Server_sap
If you find this information useful, please award points for "correct" or "helpful" to the appropriate people.
Duncan
VMware Communities User Moderator | VCP | VCDX
-
Blogging: http://www.yellow-bricks.com
Hey Guys ,
Thanks agian , Problem Solved! so here is what i did ,
Created 2 Virtual Disk from PERC controller ( RAID 5) each one as 1.4TB ( I have 750Gb x6 total Phisical Disks ).
Then Reinstalled ESXi 4 , and selected DISK0 for Installation , after Installtion ESXi 4 automatically took both Virtual Disk for DATASTORE as 1.36TB each , please attached JPG .
now will test the performance ,
Thanks & Regards
Server_Sap