engr_root
Contributor
Contributor

Changing adapters network

Hi All ,

I had a private side network set up using 192.168.2.x for use by my guest machines I then added a second console to this virtual switch which then turned it into a loop back

128.0.0.1 /255.255.255.254 how can I get it back to be

192.168.2.9 /255.255.255.0

0 Kudos
2 Replies
nitinsahi
Enthusiast
Enthusiast

Hi,

Your question does not carry required information and what is needed. Please ellaborate it little bit more in regards of the ESX configuration.

How many NICS do you have ? with what IP address and how many are usable for prodution and how many for MLAN.

please mention vswitch as well if possible......

Nitin Sahi

0 Kudos
engr_root
Contributor
Contributor

Hi

there are 3 network adapters on 2 networks the

adapter 2 is the one thats having problems it is attached to vmnic3 whitch is on vSwitch3 which is Plugged into network PrivateNetwork.

I tried to create a consol on this network (with an eye to removing the the main console from the public network). anyway somehow adding that console of course gave the

esx server a virtual nic and an IP this somehow turned my private network into a loopback for all machines on the vmserver. How do i get it back so all traffic to 192.168.2.x goes out that physical card represented by vmnic3

0 Kudos