Hola Jose, buenos dias.
Como parte de mi script de configuracion del SAI APC, la primera parte del script hace lo que tu necesitas.
Si quieres lo comentamos.
Espero que sea de ayuda
Un abrazo
#####################################################################
#!/bin/sh
#
vmshutdown.sh
#
UPS APC SHUTDOWN VIRTUAL MACHINE SCRIPT FOR VMWARE ESX 3.X, 4.0
#
ENERO 2010 - SANTIAGO GONZALEZ
#
#####################################################################
#####################################################################
set the paths that the vmware tools need
PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin"
#####################################################################
try do a nice shutdown of VM there is power
count_vm_on=0
for vm in `vmware-cmd -l` ; do
#echo "VM: " $vm
for VMstate in `vmware-cmd "$vm" getstate` ; do
#echo $VMstate
If the VM is power ON
if ; then
echo " "
echo "VM: " $vm
echo "State: is on and will now tell it to shut down"
echo "Shutting down: " $vm
vmware-cmd "$vm" stop trysoft
vmwarecmd_exitcode=$(expr $?)
if ; then
echo "exitcode: $vmwarecmd_exitcode so will now turn it off hard"
vmware-cmd "$vm" stop hard
fi
count_vm_on=$count_vm_on+1
sleep 2
if the VM is power OFF
elif ; then
echo " "
echo "VM: " $vm
echo "State: is off, so i skip it"
if the VM is power suspended
elif ; then
echo " "
echo "VM: " $vm
echo "State: is suspended, so i skip it"
if state is getstate or =
else
printf ""
#echo "unknown state: " $VMstate
fi
done
done
Sanmarfe.
VMware Certified Professional VCP3 and VCP4.
Sanmarfe.
VMware Certified Professional VCP3/VCP4/VCP5
VTSP4 / VTSP5
Si esta u otra respuesta es util, por favor marca su correspondiente notificador. Gracias/Regards
