Problema con Vmware Vcenter Converter

[splitX]

Buenos días,

Tengo una maquina virtual de un servidor ESXI 5.0 que tengo que migrar a ESX 4.00 siguiendo las recomendaciones de un usuario del foro me comento que utilizara VMWARE VCENTER CONVERTER y que no lo hiciera a mano.

Tras realizar la conversión, cuando voy por 4% me devuelve un error del tipo " AN ERROR OCURRED DURING THE CONVERSION " THE OPERATION EXPERIENCED A NETWORK ERROR" Alguien sabe el porque de este error? He mirado en google pero no sale prácticamente nada...

Adjunto Logs,

Muchas Gracias

[Samquejo]

Buenas

Yo empezaría a preocuparme aquí:

2012-07-12T11:23:58.670+02:00 [03108 error 'HttpConnectionPool'] [ConnectComplete] Connect error Se produjo un error durante el intento de conexión ya que la parte conectada no respondió adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexión establecida ya que el host conectado no ha podido responder.

Mira a ver si lo haces mejor en 2 pasos (vm a imagen workstation) y luego restauras (vm from image).

Saludos

[splitX]

Ok, he hecho la conversion a workstation 8.0, luego la podré restaurar a un esx 4.00 o tendré algún problema con la version de hardware?

Gracias!

[Samquejo]

No creo que tengas un exceso de problemas (nunca lo he hecho)

Si te da algún tema por controladoras o similar, puedes intentar sacar una imagen acronis o ghost y restaurarla contra una vm vacía.

[pcerda]

Si ya hiciste la conversión a Workstation, la conversión a ESX 4 utilizando Converter no debiera darte ningún problema.  Yo ya he tenido que realizar los mismos pasos en algunas ocasiones y funciona bien.

Probablemente los problemas que tuviste para usar Converter para pasar del ESXi 5 al ESX 4 se deba solamente a un problema de conectividad.

Saludos,

[splitX]

Buenos días,

En primer lugar agradeceros las respuestas, muchas gracias.

En segundo lugar, comentaros que después de usar el Vmware Converter ahora tengo la *.vmdk en el Storage1 del Server, pero no puedo añadirla al Iventory al no estar la vmx, me he dejado algún paso?

Me falta hacer algún restore o algo? Si tenéis algo de documentación también me sirve, gracias por vuestro tiempo una vez más

PD : Adjunto screenshot.

[Samquejo · Accepted solution]

Buenas

Puedes crear una VM sin disco y atachar ese disco.

Si no te ha creado el vmx es porque ha dado algún fallo. Revisa los logs del converter a ver que ha pasado.

Saludos

[splitX]

Ok, entonces para concluir :

Teng 1 server X con ip 192.168.1.1 y ESXI 5.00, con una maquina virtual que tengo que migrar al server con Ip 192.168.1.2 Y ESX4.00.

Cual es estas opciones exactas son es? para no cagarla más xD

Muchisimas Gracias

[splitX]

Adjunto Logs del último trabajo, yo no he visto nada raro 😕

[Samquejo]

Hola

Mira aquí

2012-07-16T14:57:28.457+02:00 [03776 info 'wizardController'] parameter>>> ThirdPartyHostedFilter ( <obj xmlns="urn:ConverterLogic" versionId="1.0" xsi:type="ArrayOfConverterLogicKeyValuePair"><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>microsoftVirtualPCVM</key><val xsi:type="xsd:string">Microsoft Virtual PC (*.vmc)</val></ConverterLogicKeyValuePair><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>parallelsVM</key><val xsi:type="xsd:string">Parallels Virtualization Products Image (*.pvs)</val></ConverterLogicKeyValuePair><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>livestateBackup</key><val xsi:type="xsd:string">Symantec LiveState Recovery Image (*.sv2i)</val></ConverterLogicKeyValuePair><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>shadowProtectBackup</key><val xsi:type="xsd:string">StorageCraft ShadowStor Image (*.spf)</val></ConverterLogicKeyValuePair><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>acronisBackup</key><val xsi:type="xsd:string">Acronis True Image Backup (*.tib)</val></ConverterLogicKeyValuePair><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>vmwareVCBBackup</key><val xsi:type="xsd:string">VMware Consolidated Backup (*.vmx)</val></ConverterLogicKeyValuePair></obj> )

2012-07-16T14:57:28.457+02:00 [03776 info 'wizardController'] parameter>>> VMwareHostedFilter ( <obj xmlns="urn:ConverterLogic" versionId="1.0" xsi:type="ArrayOfConverterLogicKeyValuePair"><ConverterLogicKeyValuePair xsi:type="ConverterLogicKeyValuePair"><key>vmwareVM</key><val xsi:type="xsd:string">VMware virtual machine (*.vmx)</val></ConverterLogicKeyValuePair></obj> )

2012-07-16T14:57:28.504+02:00 [03776 info 'wizardController'] FillPage()

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type microsoftVirtualPCVM not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type parallelsVM not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type vmwareVCBBackup not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type livestateBackup not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type shadowProtectBackup not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type acronisBackup not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildFilter 3rd party type vmwareVM not found

2012-07-16T14:57:28.504+02:00 [03576 error 'Default'] SourceSelectPluginModel::BuildThirdpartyHostedExtVector 3rd party type vmwareVM not found

2012-07-16T14:58:17.426+02:00 [03440 verbose 'HttpConnectionPool'] [RemoveConnection] Connection removed; cnx: [class Vmacore::Http::HttpConnectionPoolImpl::Cnx:043C0EB0]; pooled: 0

2012-07-16T14:59:24.613+02:00 [03576 info 'ConverterSession'] Converter::Client::Gui::Common::DiagnosticDataProvider::SetLastKnownSource - Setting last known source:

--> (converter.ComputerSpec) {

-->    dynamicType = <unset>,

-->    location = (converter.ComputerSpec.LiveComputerLocation) {

-->       dynamicType = <unset>,

-->       hostname = "ttyrt",

-->       port = <unset>,

-->       username = "ytytry",

-->       password = (not shown),

-->       osType = "windowsOs",

-->       verifyPeer = true,

-->       sslThumbprint = <unset>,

-->    },

--> }

2012-07-16T14:59:43.442+02:00 [03576 info 'ConverterSession'] Converter::Client::Gui::Common::DiagnosticDataProvider::SetLastKnownSource - Setting last known source:

--> (converter.ComputerSpec) {

-->    dynamicType = <unset>,

-->    location = (converter.ComputerSpec.ManagedVmLocation) {

-->       dynamicType = <unset>,

-->       vimConnect = (converter.VimConnectionSpec) {

-->          dynamicType = <unset>,

-->          hostname = "192.168.1.208",

-->          port = <unset>,

-->          credentials = (converter.VimConnectionSpec.LoginVimCredentials) {

-->             dynamicType = <unset>,

-->             username = "root",

-->             password = (not shown),

-->          },

-->          verifyPeer = true,

-->          sslThumbprint = <unset>,

-->       },

-->       vm = <unset>,

-->       uuid = <unset>,

-->       vmName = <unset>,

-->    },

--> }

2012-07-16T14:59:43.442+02:00 [03576 info 'ConverterSession'] Converter::Client::Gui::Common::DiagnosticDataProvider::SetLastKnownSource - Setting last known source:

--> (converter.ComputerSpec) {

-->    dynamicType = <unset>,

-->    location = (converter.ComputerSpec.ManagedVmLocation) {

-->       dynamicType = <unset>,

-->       vimConnect = (converter.VimConnectionSpec) {

-->          dynamicType = <unset>,

-->          hostname = "192.168.1.208",

-->          port = <unset>,

-->          credentials = (converter.VimConnectionSpec.LoginVimCredentials) {

-->             dynamicType = <unset>,

-->             username = "root",

-->             password = (not shown),

-->          },

-->          verifyPeer = true,

-->          sslThumbprint = <unset>,

-->       },

-->       vm = <unset>,

-->       uuid = <unset>,

-->       vmName = <unset>,

-->    },

--> }

2012-07-16T14:59:43.442+02:00 [02396 verbose 'wizardController'] Trying connection to VC server '192.168.1.208' with user 'root'

2012-07-16T14:59:43.442+02:00 [02396 verbose 'wizardController'] Getting VIM connection to 192.168.1.208...

2012-07-16T14:59:43.442+02:00 [02396 info 'wizardController'] Connecting to host 192.168.1.208 on port 443

2012-07-16T14:59:43.442+02:00 [02396 info 'wizardController'] localVersion is: vim.version.version7

2012-07-16T14:59:43.442+02:00 [00996 error 'Default'] SSLStreamImpl::DoClientHandshake (04533fd0) SSL_connect failed. Dumping SSL error queue:

2012-07-16T14:59:43.442+02:00 [00996 error 'Default'] [0] error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed

2012-07-16T14:59:43.442+02:00 [00996 error 'HttpConnectionPool'] [ConnectComplete] Connect error SSL Exception: The remote host certificate has these problems:

-->

--> * unable to get local issuer certificate

-->

--> * Host name does not match the subject name(s) in certificate.

2012-07-16T14:59:43.442+02:00 [02396 warning 'wizardController'] CreateVimConnection has SSL certificate error while trying to connect, Error: SSL Exception: The remote host certificate has these problems:

-->

--> * unable to get local issuer certificate

-->

--> * Host name does not match the subject name(s) in certificate.

-->

2012-07-16T14:59:43.442+02:00 [02396 error 'wizardController'] GetVimConnection has error while trying to connect (3), Error: converter.fault.SSLVerificationFault

-->

2012-07-16T14:59:43.473+02:00 [03576 verbose 'SSLVerificationFailureHandler'] SSL thumbprint for 192.168.1.208:443 [30:18:52:04:6C:D5:2E:2A:D2:51:B0:58:A8:93:30:92:B3:45:7C:7E]

2012-07-16T14:59:43.473+02:00 [03576 verbose 'SSLVerificationFailureHandler'] SSL error message is The remote host certificate has these problems:

-->

--> * unable to get local issuer certificate

-->

--> * Host name does not match the subject name(s) in certificate.

2012-07-16T14:59:43.473+02:00 [03576 error 'SSLCertificateIgnorer'] Failed reading SSL thumbprint from registry.

2012-07-16T14:59:46.301+02:00 [03576 info 'ConverterSession'] Converter::Client::Gui::Common::DiagnosticDataProvider::SetLastKnownSource - Setting last known source:

--> (converter.ComputerSpec) {

-->    dynamicType = <unset>,

-->    location = (converter.ComputerSpec.ManagedVmLocation) {

-->       dynamicType = <unset>,

-->       vimConnect = (converter.VimConnectionSpec) {

-->          dynamicType = <unset>,

-->          hostname = "192.168.1.208",

-->          port = <unset>,

-->          credentials = (converter.VimConnectionSpec.LoginVimCredentials) {

-->             dynamicType = <unset>,

-->             username = "root",

-->             password = (not shown),

-->          },

-->          verifyPeer = true,

-->          sslThumbprint = "30:18:52:04:6C:D5:2E:2A:D2:51:B0:58:A8:93:30:92:B3:45:7C:7E",

-->       },

-->       vm = <unset>,

-->       uuid = <unset>,

-->       vmName = <unset>,

-->    },

--> }

2012-07-16T14:59:46.301+02:00 [03576 info 'ConverterSession'] Converter::Client::Gui::Common::DiagnosticDataProvider::SetLastKnownSource - Setting last known source:

--> (converter.ComputerSpec) {

-->    dynamicType = <unset>,

-->    location = (converter.ComputerSpec.ManagedVmLocation) {

-->       dynamicType = <unset>,

-->       vimConnect = (converter.VimConnectionSpec) {

-->          dynamicType = <unset>,

-->          hostname = "192.168.1.208",

-->          port = <unset>,

-->          credentials = (converter.VimConnectionSpec.LoginVimCredentials) {

-->             dynamicType = <unset>,

-->             username = "root",

-->             password = (not shown),

-->          },

-->          verifyPeer = true,

-->          sslThumbprint = "30:18:52:04:6C:D5:2E:2A:D2:51:B0:58:A8:93:30:92:B3:45:7C:7E",

-->       },

-->       vm = <unset>,

-->       uuid = <unset>,

-->       vmName = <unset>,

-->    },

--> }

2012-07-16T14:59:46.301+02:00 [00888 verbose 'wizardController'] Trying connection to VC server '192.168.1.208' with user 'root'

2012-07-16T14:59:46.301+02:00 [00888 verbose 'wizardController'] Getting VIM connection to 192.168.1.208...

2012-07-16T14:59:46.301+02:00 [00888 info 'wizardController'] Connecting to host 192.168.1.208 on port 443

2012-07-16T14:59:46.301+02:00 [00888 info 'wizardController'] localVersion is: vim.version.version7

2012-07-16T14:59:46.348+02:00 [00888 info 'wizardController'] Remote version is: vim.version.version5

Creo que sigues con problemas. ¿es a 100 o a giga? ¿Tienes los drivers de red correctos?

Saludos