Estimados.
Tengo que convertir un Novell 6.5 físico en un VM de ESX 3.5u3.
He tenido problemas, y no he logrado avanzar.
Alguien conoce un procedimiento, manual, o software adecuado para cumplir con esta tarea?
Gracias a todos.
Step 1: Clone
Use supported third party cloning application (e.g. Portlock Storage Manager, Symantec ServerMagic for Netware)
to clone physical disk(s) to new destination virtual machine’s virtual disk(s)
Step 2: Configure
Utilize Novell Helper VM
Create new Novell VM from scratch to provide source of virtual driver files
Attach new destination virtual disk to Novell Helper VM
Replace key Novell files on destination VM
Copy from \NWSERVER\DRIVERS\
STARTUP.NCF and STARTUP.ORG
SCSIHD. CDM and SCSIHD.DDI
LSIMPTNW.HAM and LSIMPTNW.DDI
Update virtual ethernet adapter
Run Novell INETCFG command and select CNEAMD.LAN driver
Update STARTUP.NCF
Remove unnecessary modules
Correct SLOT parameter values
Sample STARTUP.NCF file – for example reference only
LOAD ACPIDRV.PSM
End PSM Drivers #########
LOAD IDECD.CDM
LOAD SCSIHD.CDM
End CDM Drivers ##########
LOAD IDEATA.HAM SLOT=10004
LOAD LSIMPTNW.HAM SLOT=2
End HAM Drivers ##########
please provide points if this is helpful
Jose Ruelas
Step 1: Clone
Use supported third party cloning application (e.g. Portlock Storage Manager, Symantec ServerMagic for Netware)
to clone physical disk(s) to new destination virtual machine’s virtual disk(s)
Step 2: Configure
Utilize Novell Helper VM
Create new Novell VM from scratch to provide source of virtual driver files
Attach new destination virtual disk to Novell Helper VM
Replace key Novell files on destination VM
Copy from \NWSERVER\DRIVERS\
STARTUP.NCF and STARTUP.ORG
SCSIHD. CDM and SCSIHD.DDI
LSIMPTNW.HAM and LSIMPTNW.DDI
Update virtual ethernet adapter
Run Novell INETCFG command and select CNEAMD.LAN driver
Update STARTUP.NCF
Remove unnecessary modules
Correct SLOT parameter values
Sample STARTUP.NCF file – for example reference only
LOAD ACPIDRV.PSM
End PSM Drivers #########
LOAD IDECD.CDM
LOAD SCSIHD.CDM
End CDM Drivers ##########
LOAD IDEATA.HAM SLOT=10004
LOAD LSIMPTNW.HAM SLOT=2
End HAM Drivers ##########
please provide points if this is helpful
Jose Ruelas