Setting up SRM 5.5 using RecoverPoint new install and setup.
I have downloaded and installed the recommended SRA Adapter in my SRM server, which is EMC_RecoverPoint_Storage_Replication_Adapter_Version_184.108.40.206. The Unisphere for RecoverPoint I believe has been set up properly too. But I must be missing something.
Every time I try and add the array using the either the IP or the FQDN with the user name and password of Unisphere it will not connect. I get the following error: See attachment, any insight what am I missing?
Have you checked the compatibility for your device :-
Also what do the SRM Logs show ?
Yep. It is compatible. Seems like an authentication issue. Just not sure if its on the emc side of it. Not easy finding documentation for setting up recoverpoint.
Re: the compatibility, I just wanted to confirm the basics. I think you are on the right track. I had similar issues during my 5.1 setup. I suggest you look at the 'Advanced Settings' of your remote site. Steps to get there are, after connecting to sites successfully, right-click remote site and select "Advanced Settings". I suggest first to change the setting "Storage-storage.commandTimeout". Increase this to 1200 or 1800 and try again.
Let me know how this goes.
I had a similar problem, but with a slightly different error message.
It had to do with SRA talking HTTP to RecoverPoint, and RecoverPoint (4.1 in my case) vRPA's not listening on port 80 ....
Hope this fixes your issue as well