I have 2 VMs that I want to have share a Raw LUN. I can add the raw lun on the 1st VM but cannot see the raw lun for the 2nd VM. Can this be done? How do I add the LUN to both VMs.
Thanks,
Savoy6
To take this a step further; when you're adding the LUN as an RDM and it asks what SCSI device node you want to attach it to; make sure you select a different adapter ID. You'll notice numbers like 0:1, 0:2, etc.
0 in this case is the adapter ID; and the 1 and 2 represent the SCSI ID.
That said you probably want to add your LUN as 1:0.
This will create a new LSI logic card and you will enable bus sharing on that.
You can then map the RDM to a second VM though keep in mind that vmotion won't work for these two vms anymore.
Hello,
You need to enable SCSI bus sharing on the VM SCSI Adapter.
To take this a step further; when you're adding the LUN as an RDM and it asks what SCSI device node you want to attach it to; make sure you select a different adapter ID. You'll notice numbers like 0:1, 0:2, etc.
0 in this case is the adapter ID; and the 1 and 2 represent the SCSI ID.
That said you probably want to add your LUN as 1:0.
This will create a new LSI logic card and you will enable bus sharing on that.
You can then map the RDM to a second VM though keep in mind that vmotion won't work for these two vms anymore.