Bonjour,
Je rencontre un problème avec les paramètres réseau.
J'ai pas de serveur AD et de serveur DNS.
J'ai rajouter 2 ligne dans le fichier /etc/hosts
192.168.10.123 vdp.evic.lan vdp
192.168.10.35 vcenter.evic.lan vcenter
Voici la config :
ESXI : 192.168.10.40
Vcenter : 192.168.10.35
VDP : 192.168.10.135
Dans la configuration réseaux j'ai un message d'erreur qui apparais:
"Impossible de résoudre l'adresse IP/DNS. Veuillez revérifier le nom d’hôte, le nom de domaine et les valeurs DNS pour transférer et inverser la validation de la requête."
Je ne vois pas du tout de quoi vient le problème.
Pouvez vous m'aider svp.
Merci
Could you please translate the same in English.. if possible
Hello there,
I have a problem with the network settings.
I do not have AD server and DNS server.
I add 2 line in the file / etc / hosts
192.168.10.123 vdp.evic.lan vdp
192.168.10.35 vcenter.evic.lan vCenter
And
/etc/resolv.conf
domain evic.lan
search evic.lan
Here is the config:
ESXi: 192.168.10.40
VCenter: 192.168.10.35
VDP: 192.168.10.135
In the network configuration I get an error message appear:
"Unable to resolve the IP / DNS address. Please recheck the host name, domain, and DNS values for transfer and reverse the validation of the application."
I do not see at all what the problem is.
Can you please help me.
thank you
Did you follow this blog post: http://www.virtuallyghetto.com/2013/11/how-to-evaluate-vsphere-data-protection.html
Did you make the dnsmasq configuration step ?
Step 3 - Next we need to edit the dnsmasq configuration file located in /etc/dnsmasq.conf and add the following entry (replace it with the IP Address you have assigned your VDP appliance):
server=192.168.1.104
Step 4 - Finally we just need to start the dnsmasq service as well as enable it to automatically startup on boot by running the following two commands:
/etc/init.d/dnsmasq start
chkconfig dnsmasq on
Yes I've done that.
Now when I log all parameters are entered meadows!
But it still does not work.
Help Me :smileycry: