VMware Cloud Community
Ruskov
Contributor
Contributor

vSphere Data Protection 5.1

Bonjour,

Je rencontre un problème avec les paramètres réseau.

J'ai pas de serveur AD et de serveur DNS.

J'ai rajouter 2 ligne dans le fichier /etc/hosts

192.168.10.123 vdp.evic.lan vdp

192.168.10.35 vcenter.evic.lan vcenter

Voici la config :

ESXI : 192.168.10.40

Vcenter : 192.168.10.35

VDP : 192.168.10.135

Dans la configuration réseaux j'ai un message d'erreur qui apparais:

"Impossible de résoudre l'adresse IP/DNS. Veuillez revérifier le nom d’hôte, le nom de domaine et les valeurs DNS pour transférer et inverser la validation de la requête."

Je ne vois pas du tout de quoi vient le problème.

Pouvez vous m'aider svp.

Merci

Reply
0 Kudos
7 Replies
King_Robert
Hot Shot
Hot Shot

Could you please translate the same in English..Smiley Happy if possible

Reply
0 Kudos
Ruskov
Contributor
Contributor

Hello there,

I have a problem with the network settings.

I do not have AD server and DNS server.

I add 2 line in the file / etc / hosts

192.168.10.123 vdp.evic.lan vdp

192.168.10.35 vcenter.evic.lan vCenter

And

/etc/resolv.conf

domain evic.lan

search evic.lan

Here is the config:

ESXi: 192.168.10.40

VCenter: 192.168.10.35

VDP: 192.168.10.135

In the network configuration I get an error message appear:

"Unable to resolve the IP / DNS address. Please recheck the host name, domain, and DNS values ​​for transfer and reverse the validation of the application."

I do not see at all what the problem is.

Can you please help me.

thank you

Reply
0 Kudos
rcporto
Leadership
Leadership

Did you follow this blog post: http://www.virtuallyghetto.com/2013/11/how-to-evaluate-vsphere-data-protection.html

---

Richardson Porto
Senior Infrastructure Specialist
LinkedIn: http://linkedin.com/in/richardsonporto
Reply
0 Kudos
Ruskov
Contributor
Contributor

I've followed the tutorial ...

But this did not solve my problem

Reply
0 Kudos
rcporto
Leadership
Leadership

Did you make the dnsmasq configuration step ?

Step 3 - Next we need to edit the dnsmasq configuration file located in /etc/dnsmasq.conf and add the following entry (replace it with the IP Address you have assigned your VDP appliance):

server=192.168.1.104

Step 4 - Finally we just need to start the dnsmasq service as well as enable it to automatically startup on boot by running the following two commands:

/etc/init.d/dnsmasq start
chkconfig dnsmasq on

---

Richardson Porto
Senior Infrastructure Specialist
LinkedIn: http://linkedin.com/in/richardsonporto
Reply
0 Kudos
Ruskov
Contributor
Contributor

Yes I've done that.

Now when I log all parameters are entered meadows!

But it still does not work.

  • nslookup vcenter 127.0.0.1     Ok
  • ping vcenter 127.0.0.1         Non Ok
  • nslookup 192.168.10.35 127.0.0.1       Ok
  • ping 192.168.10.35 127.0.0.1           Non Ok
  • nslookup 192.168.10.123 127.0.0.1          Ok
  • ping 192.168.10.123 127.0.0.1              Non ok
Reply
0 Kudos
Ruskov
Contributor
Contributor

Help Me Smiley Happy:smileycry:

Reply
0 Kudos