i have installed esxi5 on my dell poweredge2950 and enable the snmp traps.
Our snmp manger tool recieving now every 5 min this traps:
vmwProductSpecific.90.0.401  vmwProductSpecific.30.3.0 (Octet String): 07 dc 09 07 07 35 24 00  snmpTrapEnterprise.0 (Object ID): vmwProductSpecific.90
Im really confused now why.
Can anybody help me with this?
Thank you very much
This is an absolutely harmless trap, which tells you that - according to the MIB (VMWARE-CIMOM-MIB) "This notification, if the agent is so configured, will be sent on a periodic basis to indicate cimom indication delivery is functioning".
So only the failure to get that traps could be potential problem.
The trap you are seeing is from the VMWARE-CIMOM-MIB.
VMWARE-CIMOM-MIB vmwCimOmHeartbeat notification 220.127.116.11.4.1.6818.104.22.168.401
Changing to sensors is not a good idea as then the individual traps for fan, power supply, etc won't show up
That leaves these choices:
1. Filter out the trap (vicfg-snmp --notrap 22.214.171.124.4.1.68126.96.36.199.401
This configuration command tells the agent what traps not to send, it can be a list separated by a comma (trap-id1,trapid2,...)
2. Change the periodicity of the CIM Heartbeat (default is 5 minutes)
-- I searched for the steps to do that, but came up flat. Will update the post shortly.
Here's how to change the rate at which the CIMOM's provider sends heartbeats.
The minimum is 30 seconds and maximum value is 2147483647 (that's 24,855 days according to wolfram alpha)