leiw324
Contributor
Contributor

iSCSI paths question

Jump to solution

Hello

I'm trying mulitpath, the iscsi-target server has two NICs and ESX has three NICs binded and created three VMKernel.

The following is the iSCSI storage adapter information:

The following is one of the manage path:

Why it only show six paths? is it 18 paths ?

Thanks !

0 Kudos
1 Solution

Accepted Solutions
idle-jam
Immortal
Immortal

It will only show the actual LUNs (6) and now the total paths (3) that you have.


iDLE-jAM | VCP 2, VCP 3 & VCP 4

If you found this or any other answer useful please consider the use of the Helpful or correct buttons to award points.

View solution in original post

0 Kudos
2 Replies
erkalaslankara
VMware Employee
VMware Employee

Hi,

You have 3 devices and 6 paths for each. "Connected Targets" vaule shows the count of total paths you have. 3 devices * 6 paths for each = 18 paths totatly.

0 Kudos
idle-jam
Immortal
Immortal

It will only show the actual LUNs (6) and now the total paths (3) that you have.


iDLE-jAM | VCP 2, VCP 3 & VCP 4

If you found this or any other answer useful please consider the use of the Helpful or correct buttons to award points.

View solution in original post

0 Kudos