Hi, guys.
At first, english isnt native for me, so excuse me for mistakes.
I have HP DL180 G6 server with ESXi 5.1.0 update 2 (1483097) installed on it.
It has ILO 100 working properly, i ca
So, when I run /opt/hp/tools/hponcfg on esxi host, it says
/opt/hp/tools # ./hponcfg
HP Lights-Out Online Configuration utility
Version 4.0-12 (c) Hewlett-Packard Company, 2011
ERROR: Could not find the Management Processor Device Node.
Please check if the iLO driver module is installed and running properly.
ACTION REQUIRED: Install/Re-install hp Lights-Out driver package('hp-ilo' RPM) for iLO.
��O /opt/hp/tools #
In fact, my problem is that I cant monitor this esxi host with HP SIM.
I have another server, HP DL380G7 with ILO3, there ilo works fine.
Here is output:
~ # /opt/hp/tools/hponcfg
HP Lights-Out Online Configuration utility
Version 4.0-12 (c) Hewlett-Packard Company, 2011
Firmware Revision = 1.26 Device type = iLO 3 Driver name = hpilo
iLO IP Address: 192.168.1.99
May be ILO 100 is just not supported by esxi 5, but I cant find any info about this problem.