esxi 5.5,vmnic with ixgbe driver(intel 82599 10G) can't recv packet with vlan tag,but tg3 driver(NetXtreme BCM5719 1G) can.help
Can we get some more info about the setup. Is it VGT, VST. Is it ESX to ESX traffic or VMs are involved? What is the ixgbe driver version you are using?
thankyou,now you can see my conf in this VM.I think it’s vst cause I set vlan 4095 all of my VM
I use a Flow meter to create and send pkt in vminc5 or vmnic3 to test esxi network.
I use pktcap –uw –uplink on esxi to cap what I send.
And the topic is what I meet
Follow is what cap in vmnic3.vmnic5 is not ok - -!
14:47:56.422346 Captured at EtherswitchDispath point, TSO not enabled, Checksum not offloaded and not verified, VLAN tag 11, length 56.
Segment ---- 56 bytes:
0x0000: 2056 4546 4654 1046 9846 4634 0800 4500
0x0010: 002a 0000 0000 4072 f70e c0a8 0102 c0a8
0x0020: 0101 ffff ffff ffff ffff ffff ffff ffff
0x0030: ffff ffff ffff ffff
Destroying session 6
damn it! I find I have set intel 82599 VF(esxcfg-module ixgbe -s max_vfs=4,4)! Now I close it and reboot(esxcfg-module ixgbe -s max_vfs=0,0),it work ok.But why open the 82599 VF can't recv vlan tag pkt,it's also a question!!
SR-IOV should not affect VLANs in the way you're describing. There are some limitations regarding VLAN filtering on 82599 cards but it should not impact you.
Have you tried newer drivers? There are 4.5.2 and 4.5.3 available on HCL
Some older versions had vLAN tagging issues, please update to the latest one.
well,i'll update later.And is there a esxi cli to show the vmnicX's recv/send statistics as same as sar Linux?
oops,I'v updated 4.5.2 but it still can't work with SR-IOV