VMware Cloud Community
MirceaG
Contributor
Contributor

cannot access local storage

Very simple setup, two HPE Proliant DL380 hosts, each with two HPE SmartArray P408e-p controllers connected directly (through SAS cables) to an HPE MSA2050 SAN. This is not in production (yet)

I created a volume on the SAN, mapped it to only one HBA on only one server, it shows in ESXi but when I try to create a datastore I get an error. I've checked the version of the HBA driver and it is the latest available from HPE (70.4054.2.118). I'm running HPE-Custom-AddOn_702.0.0.10.7.0-52 on the servers and VL270P005 on the SAN. I tried turning on "Illegal Request" on SAN on or off, tried assigning higher number LUN, same result. Below is the relevant portion of the vmkernel log. Thanks for any help

 

2021-09-13T16:55:01.846Z cpu4:2097833)smartpqi01: pqisrc_add_softs_entry:0248: Added device [2 of 3]: B 3: T 1: L 1

2021-09-13T16:55:01.846Z cpu4:2097833)smartpqi01: pqisrc_add_device:1441: vendor: HPE MSA 2050 SAS model: MSA 2050 SAS bus:3 target:1 lun:1 is_physical_device:0x0 expose_device:0x1 volume_offline 0x0 volume_status 0x0

2021-09-13T16:55:01.846Z cpu4:2097833)smartpqi01: pqisrc_discover:2104: Path created for C3:T1:L1
2021-09-13T16:55:01.846Z cpu4:2097833)WARNING: smartpqi: get_counter_index:1963: Assertion failed at file /u1/jenkins/workspace/_release_SR3.01.25_210407_4054.2/smartpqi/pqilib/src/pqi_request.c line 1963
2021-09-13T16:55:01.847Z cpu4:2097833)smartpqi01: pqisrc_discover:2117: Path configured for C3:T1:L1
2021-09-13T16:55:01.847Z cpu4:2097833)HPP: HppCreateDevice:3029: Created logical device 'naa.600c0ff000442ac4ba493f6101000000'.
2021-09-13T16:55:01.847Z cpu4:2097833)WARNING: HPP: HppClaimPath:3815: Failed to claim path 'vmhba1:C3:T1:L1': Not supported
2021-09-13T16:55:01.847Z cpu4:2097833)HPP: HppUnclaimPath:3861: Unclaiming path vmhba1:C3:T1:L1
2021-09-13T16:55:01.847Z cpu4:2097833)ScsiPath: 8717: Plugin 'HPP' rejected path 'vmhba1:C3:T1:L1'
2021-09-13T16:55:01.847Z cpu4:2097833)ScsiClaimrule: 1557: Plugin HPP specified by claimrule 65531 was not able to claim path vmhba1:C3:T1:L1: Not supported
2021-09-13T16:55:01.847Z cpu4:2097833)VMKAPICore: 1860: Loading Module vmw_satp_alua
2021-09-13T16:55:01.874Z cpu3:2102930)Loading module vmw_satp_alua ...
2021-09-13T16:55:01.875Z cpu3:2102930)Elf: 2060: module vmw_satp_alua has license VMware
2021-09-13T16:55:01.876Z cpu3:2102930)Mod: 4789: Initialization of vmw_satp_alua succeeded with module ID 89.
2021-09-13T16:55:01.876Z cpu3:2102930)vmw_satp_alua loaded successfully.
2021-09-13T16:55:01.876Z cpu25:2100201)smartpqi01: pqisrc_show_sense_data_simple:0148: [ERR INFO] BTL: 3:1:1 op=0xa3 path=Raid K:C:Q: 6:29:0

2021-09-13T16:55:01.876Z cpu25:2100201)smartpqi01: os_raid_response_error:1135: err_info status=0x2 data_out=0x0. VMK host=0x0 device=0x2

2021-09-13T16:55:01.876Z cpu10:2097851)NMP: nmp_ThrottleLogForDevice:3861: Cmd 0xa3 (0x45b8c19487c0, 0) to dev "Unregistered Device" on path "vmhba1:C3:T1:L1" Failed:
2021-09-13T16:55:01.876Z cpu10:2097851)NMP: nmp_ThrottleLogForDevice:3869: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. Act:NONE. cmdId.initiator=0x45388b19bc28 CmdSN 0x0
2021-09-13T16:55:01.876Z cpu29:2097692)VMW_SATP_ALUA: satp_alua_issueCommandOnPath:706: Path (vmhba1:C3:T1:L1) command 0xa3 failed with transient error status Transient storage condition, suggest retry. sense data: 0x6 0x29 0x0. Waiting for 20 seconds f$
2021-09-13T16:55:01.877Z cpu29:2097692)StorageApdHandler: 966: APD Handle Created with lock[StorageApd-0x4304d3939040]
2021-09-13T16:55:01.877Z cpu29:2097692)ScsiEvents: 508: Event Subsystem: Device Events, Created!
2021-09-13T16:55:01.877Z cpu29:2097692)ScsiEvents: 508: Event Subsystem: Device Events - Internal, Created!

2021-09-13T16:55:01.877Z cpu29:2097692)VMWARE SCSI Id: Id for vmhba1:C3:T1:L1
0x60 0x0c 0x0f 0xf0 0x00 0x44 0x2a 0xc4 0xba 0x49 0x3f 0x61 0x01 0x00 0x00 0x00 0x4d 0x53 0x41 0x20 0x32 0x30
2021-09-13T16:55:01.878Z cpu29:2097692)ScsiDeviceIO: 9727: QErr is correctly set to 0x0 for device naa.600c0ff000442ac4ba493f6101000000.
2021-09-13T16:55:01.878Z cpu29:2097692)WARNING: ScsiDeviceIO: 10120: The device naa.600c0ff000442ac4ba493f6101000000 does not permit the system to change the sitpua bit to 1.
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 40, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 200, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 800, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 400, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 8, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 2000, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 1, Parameter: 0x4304d38e8640, Registered!
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiDevice: 6121: Successfully registered device "naa.600c0ff000442ac4ba493f6101000000" from plugin "NMP" of type 0
2021-09-13T16:55:01.879Z cpu29:2097692)NMP: nmp_DeviceUpdateProtectionInfo:748: Set protection info for device 'naa.600c0ff000442ac4ba493f6101000000', Enabled: 0 ProtType: 0x0 Guard: 0x0 ProtMask: 0x0
2021-09-13T16:55:01.879Z cpu29:2097692)ScsiEvents: 301: EventSubsystem: Device Events, Event Mask: 180, Parameter: 0x430c84c2cec0, Registered!
2021-09-13T16:55:01.879Z cpu29:2097833)WARNING: NMP: nmpPathClaimEnd:1393: All Helper Completed registering device 1
2021-09-13T16:55:01.879Z cpu29:2097833)smartpqi01: os_add_device:0440: Path created/updated forchannel = 0x3, target_id =0x1, lun_id = 0x1
2021-09-13T16:55:01.879Z cpu29:2097833)smartpqi01: os_add_device:0452: Path State changing channel = 0x3, target_id =0x1, lun_id = 0x1
2021-09-13T16:55:01.879Z cpu29:2097833)smartpqi01: pqisrc_display_device_info:0307: added scsi BTL 3:1:1: HPE MSA 2050 SAS SSDSmartPathCap- En- Exp+ qd=0

 

Reply
0 Kudos
1 Reply
yeraldocaleb
Contributor
Contributor

hi there, did you find a way to resolve the problem?

Reply
0 Kudos