Vmware hp GEN10 SSD/HDD not dectected

[flammeur95]

Hello folks,

I have purshace a gen10 and would like to install vmware (any version) on it.

I tryed to put the custom hp image for vmware on an usb but my ssd or hdd are not detected, so i install the OS on the usb key but vmware still doesn't detect any disk.

I also installed the boot iso directly on the ssd but it won't boot up on it

i was checking to create a custom image but i am lost in the settings and didn't find any tutotrial on it

Thanks for your help !

[a_p_]

Welcome to the Community,

are the SSDs, and HDDs connected to a RAID controller? Did you already configure the RAID, and the logical volumes?

Btw. HPE released an updated v6.5U1 OEM image today (see Download VMware vSphere).

André

PS: Discussion moved to VMware ESXi

[Jitu211003]

Hi,

Recreate the RAID from the post screen try installing the HP customize image then.

[Nick_Andreev]

Connect to the server using HP iLO and mount the .iso image that way. This is typically the easiest way of doing it.

[flammeur95]

Thanks for yours answers i will try the image and check the raid  by the way there no ilo on the gen10 .