Is it okay to have the following scenarios:
2 management traffic
2 vmotion traffic
2 vsan traffic
2 ft traffic
Im referring to configuration either in standard switch, distributed switch or both as long as two vmkernel traffic for each is present.
I have encountered when in distributed switch, 2 vmkernels are created for vmotion (1 in each distributed switch. I created 2 distributed switch).
When we tried to do vmotion, it doesnt allow it.
regarding 2 VSAN VMkernel adapter that you are planning to create, something important to consider there is
Unlike multiple-NIC vMotion, Virtual SAN does not support multiple VMkernel adapters on the same subnet.
Please refer Virtual Network Infrastructure section of following guide
http://www.vmware.com/files/pdf/products/vsan/VMware-Virtual-SAN-Network-Design-Guide.pdf
Check the following KB article for guidelines for Multi-NIC vMotion: VMware KB: Multiple-NIC vMotion in vSphere
Refer to below article for Multi-Nic vMotion:-
VMware KB: Multiple-NIC vMotion in vSphere
regarding 2 VSAN VMkernel adapter that you are planning to create, something important to consider there is
Unlike multiple-NIC vMotion, Virtual SAN does not support multiple VMkernel adapters on the same subnet.
Please refer Virtual Network Infrastructure section of following guide
http://www.vmware.com/files/pdf/products/vsan/VMware-Virtual-SAN-Network-Design-Guide.pdf