Contributor
Contributor

Unsupported sata controllers, again

Hi guys, I know this is old question, but I cannot find solution.

I install ESXi 6.5 with integrated sata-xachi on ga-h55m-usb3 rev 2.0 with i3-560. In BIOS I set AHCI mode in all places that I find.

lspci -v show me, that driver for sata controller installed:

0000:00:1f.2 SATA controller Mass storage controller: Intel Corporation Ibex Peak 6 port SATA AHCI Controller [vmhba0]

         Class 0106: 8086:3b22

But in web client I doesn't see my SATA controller. What I do wrong and how to fix it?

0 Kudos
3 Replies
Enthusiast
Enthusiast

Best way is to see by running command as you have mentioned - lspci -v

TRY below steps

Host > Configuration > Storage Partition Configuration

Procedure

  1. Browse to the host in the vSphere Web Client navigator.
  2. Click the Configure tab.
  3. Under Storage, click Storage Adapters, and select the adapter (vmhba#) to configure.
  4. Under Adapter Details, click the Properties tab
0 Kudos
Contributor
Contributor

Sorry, but I cannot find configure tab. I use ESXi 6.5 free license and web interface that available at my  server ip. Снимок.PNG

0 Kudos
Enthusiast
Enthusiast

Run ESX cli command mode, its easy to fetch details.

0 Kudos