Hello Everyone!
I have issue with PCI cards, I can't connect to two different VM's because I have message that device is already in use. I think that is connected to parent and dependency. Is there a possibility to change that information for those cards? If yes, how can I do that?
0000:04:04.0:
Address: 0000:04:04.0
Segment: 0x0000
Bus: 0x04
Slot: 0x04
Function: 0x0
VMkernel Name:
Vendor Name: Vendor Name
Device Name: Communication Board
Configured Owner: VM Passthru
Current Owner: VM Passthru
Vendor ID: 0x110a
Device ID: 0x4035
SubVendor ID: 0x110a
SubDevice ID: 0x4035
Device Class: 0x0200
Device Class Name: Ethernet controller
Programming Interface: 0x00
Revision ID: 0xc8
Interrupt Line: 0x0b
IRQ: 255
Interrupt Vector: 0x00
PCI Pin: 0x00
Spawned Bus: 0x00
Flags: 0x3001
Module ID: 42
Module Name: pciPassthru
Chassis: 0
Physical Slot: -1
Slot Description:
Device Layer Bus Address: p0000:04:04.0
Passthru Capable: true
Parent Device: PCI 0:3:0:0
Dependent Device: PCI 0:3:0:0
Reset Method: Bridge reset
FPT Sharable: true
Error getting field NUMA Node
0000:04:05.0:
Address: 0000:04:05.0
Segment: 0x0000
Bus: 0x04
Slot: 0x05
Function: 0x0
VMkernel Name:
Vendor Name: Vendor Name
Device Name: Communication Board
Configured Owner: VM Passthru
Current Owner: VM Passthru
Vendor ID: 0x110a
Device ID: 0x4035
SubVendor ID: 0x110a
SubDevice ID: 0x4035
Device Class: 0x0200
Device Class Name: Ethernet controller
Programming Interface: 0x00
Revision ID: 0xc9
Interrupt Line: 0x0a
IRQ: 255
Interrupt Vector: 0x00
PCI Pin: 0x00
Spawned Bus: 0x00
Flags: 0x3001
Module ID: 42
Module Name: pciPassthru
Chassis: 0
Physical Slot: -1
Slot Description:
Device Layer Bus Address: p0000:04:05.0
Passthru Capable: true
Parent Device: PCI 0:3:0:0
Dependent Device: PCI 0:3:0:0
Reset Method: Bridge reset
FPT Sharable: true
Error getting field NUMA Node
Thank You in advance!
Regards
Bart
