RDM NPIV on esxi 5.5

[akanjic]

Hi,

I am trying to configure NPIV but I have got stuck with following messages:

2014-09-29T10:15:19.711Z cpu32:724435)VSCSI: 3868: handle 8199(vscsi0:0):Creating Virtual Device for world 724438 (FSS handle 8248815) numBlocks=41943040 (bs=512)

2014-09-29T10:15:19.711Z cpu32:724435)VSCSI: 271: handle 8199(vscsi0:0):Input values: res=0 limit=-2 bw=-1 Shares=1000

2014-09-29T10:15:19.712Z cpu32:724435)ScsiNpiv: 1701: Physical Path : adapter=vmhba5, channel=0, target=0, lun=2

2014-09-29T10:15:19.712Z cpu32:724435)WARNING: lpfc: lpfc_discovery_threads_init:1501: 0:0404 Config Param discovery-threads set to x1

2014-09-29T10:15:19.712Z cpu32:724435)DMA: 612: DMA Engine 'lpfc_adapter_dma_engine_0' created using mapper 'DMANull'.

2014-09-29T10:15:19.713Z cpu32:724435)WARNING: lpfc: lpfc_FC_VportCreate:514: 0:(1):1825 Vport Created.

2014-09-29T10:15:19.773Z cpu22:33642)lpfc: lpfc_bind_scsiid:3764: 0:(1):3237 SCSI ID 0  WWNN:50:06:01:60:88:60:3e:2a,  WWPN:50:06:01:60:08:60:3e:2a

2014-09-29T10:15:19.784Z cpu22:33642)lpfc: lpfc_bind_scsiid:3764: 0:(1):3237 SCSI ID 1  WWNN:50:06:01:60:88:60:3e:2a,  WWPN:50:06:01:68:08:60:3e:2a

2014-09-29T10:15:20.017Z cpu36:34436)World: 14296: VC opID hostd-77c7 maps to vmkernel opID 6f18ab3b

2014-09-29T10:15:20.717Z cpu61:33653)Device: 1279: Registered device: 0x4109f7718060 logical#pci#s00000001.00#0#24 com.vmware.Virtual_HBAPort (parent=0xb1d4109f7720b85)

2014-09-29T10:15:20.717Z cpu61:33653)ScsiPsaDriver: 1713: Registered Logical Vport device (logical#pci#s00000001.00#0#24) with device layer as [0x3ad74109f772165a].

2014-09-29T10:15:20.717Z cpu61:33653)Registering Vport Device done:[Success]

2014-09-29T10:15:20.727Z cpu61:33653)PCI: 115: Device 0x3ad74109f772165a is not an PCI vmkDevice

2014-09-29T10:15:20.727Z cpu61:33653)CpuSched: 583: user latency of 724446 Cmpl-vmhba64-0 0 changed by 33653 vmkdevmgr -1

2014-09-29T10:15:20.728Z cpu61:33653)Device: 355: Found driver psa_vport for device 0x3ad74109f772165a

2014-09-29T10:15:20.728Z cpu32:724435)WARNING: ScsiNpiv: 1344: Created vport for world 724438, vmhba5

2014-09-29T10:15:20.729Z cpu32:724435)lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0:(0):3271: FCP cmd x0 failed <0/2> sid x0f0454, did x0a1300, oxid xffff SCSI Chk Cond - Unit Attn: Data(x2:x6:x29:x0)

2014-09-29T10:15:20.729Z cpu32:724435)ScsiScan: 140: Path 'vmhba5:C0:T0:L2': Peripheral qualifier 0x1 not supported

2014-09-29T10:15:20.729Z cpu32:724435)WARNING: ScsiNpiv: 1141: Physical uid does not match VPORT uid, NPIV Disabled for this VM

2014-09-29T10:15:20.730Z cpu32:724435)ScsiNpiv: 1152: NPIV vport rescan complete, [0:2] (0x4109db831880) [0x4109db82a140] status=0xbad0132

2014-09-29T10:15:20.730Z cpu32:724435)lpfc: lpfc_scsi_cmd_iocb_cmpl:2157: 0:(0):3271: FCP cmd x0 failed <1/2> sid x0f0454, did x0a0100, oxid xffff SCSI Chk Cond - Unit Attn: Data(x2:x6:x29:x0)

2014-09-29T10:15:20.731Z cpu32:724435)ScsiScan: 140: Path 'vmhba5:C0:T1:L2': Peripheral qualifier 0x1 not supported

2014-09-29T10:15:20.731Z cpu32:724435)WARNING: ScsiNpiv: 1141: Physical uid does not match VPORT uid, NPIV Disabled for this VM

2014-09-29T10:15:20.732Z cpu32:724435)ScsiNpiv: 1152: NPIV vport rescan complete, [1:2] (0x4109db834940) [0x4109db82a140] status=0xbad0132

2014-09-29T10:15:20.732Z cpu32:724435)WARNING: ScsiNpiv: 1788: Failed to Create vport for world 724438, vmhba5, rescan failed, status=bad0001

2014-09-29T10:15:20.732Z cpu61:33653)ScsiAdapter: 2806: Unregistering adapter vmhba64

2014-09-29T10:15:21.039Z cpu19:724443)WARNING: lpfc: lpfc_scsidone_event:2594: 0:3285 ScsiDone thread death pending....

2014-09-29T10:15:21.039Z cpu19:724443)WARNING: lpfc: lpfc_scsidone_event:2603: 0:3286 ScsiDone thread has stopped

2014-09-29T10:15:21.049Z cpu61:33653)WARNING: lpfc: lpfc_FC_VportDelete:750: 0:(1):1826 Vport Disabled.

ESXi version is 5.5.U1

Hardware is:

1. Host HP BL660c Gen8

-FC controler HP LPe1205A 8Gb FC HBA for BladeSystem c-Class

2. FC blade switch HP B-series 8/12c SAN Switch BladeSystem c-Class

3. FC fabric switch Brocade Conectrix model 530

4. SAN EMC VNX 5600

NPIV WWNs have been manualy registered on FC fabric switch and on SAN.

Thank you for any help.