Hello,
I'm trying to troubleshoot the lab I have configured, I have some issue with broadcast between VLAN with my DHCP. I have looked around the vmware community to find my answer but I didn't that's why i'm posting here !
So here's my situation :
interface FastEthernet0/1
description LINK TO ESX
switchport mode trunk
switchport nonegotiate
interface FastEthernet0/24
description LINK TO ROUTER
switchport mode trunk
interface FastEthernet0/0.100
encapsulation dot1q 100
ip address 10.1.1.254 255.255.255.0
interface FastEthernet0/0.110
encapsulation dot1q 110
ip address 10.1.2.254 255.255.255.0
ip helper address 10.1.1.0
The troubleshooting I've made :
That's why i'm assuming I'm missing something from the ESX configuration.
Thanks in advance for reading this post !
PS: I linked a screenshot of the vswitch configuration
I think you configured a incorrect IP helper address, take a look at the following line:
ip helper address 10.1.1.0
Your DCHP server is really 10.1.1.0 ? I don't think so, since 10.1.1.0 is the network ID for the network 10.1.1.0/24.
I think you configured a incorrect IP helper address, take a look at the following line:
ip helper address 10.1.1.0
Your DCHP server is really 10.1.1.0 ? I don't think so, since 10.1.1.0 is the network ID for the network 10.1.1.0/24.
Well, thank you.
I was persuaded that i could use "10.1.1.0" for all the DHCP in that network, and I was sure I have already configured in that way before.
Thank you alot :smileygrin: