AFAIK and as per the screenshot the PSOD is happening in the be2net stack in the _be_mpu_post_wrb_ring.
This only occurs when there is a broadcast storm from switch which triggers this PSOD.I would suggest you to contact IBM to get a updated driver and firmware for the Emulex nics which would resolve this issue.
Let me know if this helps
I see NMI, did you check if there is any hardware issue?
Also the backtrace is little close to one reported here
I don't know if this machine have problem, to i open call in IBM. Don't have alert in Blade about this machine,
I remove and insert the 10 gb nic card, but don't resolved this problem the purple screen.
I saw that 99% the problem with purple screen is problem with Hardware.
But i can't prove.
AFAIK and as per the screenshot the PSOD is happening in the be2net stack in the _be_mpu_post_wrb_ring.
This only occurs when there is a broadcast storm from switch which triggers this PSOD.I would suggest you to contact IBM to get a updated driver and firmware for the Emulex nics which would resolve this issue.
Let me know if this helps