VMware Cloud Community
sancherman
Contributor
Contributor

I cannot mount Datastore.

Hi, I have a problem in my Server Esxi 5.1 when mount a Datastore, this is te ERROR

Call "HostStorageSystem.MountVmfsVolume" for object "storageSystem" on ESXi "10.0.0.1" failed.

Operation failed, diagnostics report: Sysinfo error on operation returned status : Bad parameter count. Please see the VMkernel log for detailed error information

Thanks a lot

6 Replies
Alistar
Expert
Expert

Heya,

try posting vmkernel.log from /var/log here, perhaps we can find out something that could help you out Smiley Happy

Stop by my blog if you'd like :slightly_smiling_face: I dabble in vSphere troubleshooting, PowerCLI scripting and NetApp storage - and I share my journeys at http://vmxp.wordpress.com/
CoolRam
Expert
Expert

Before mount you have already satisfy the pre-requistite like enable firewall to pass the traffic and vmkenel port group .

Please do Check for the specific log in vmkernel. Log

If you find any answer useful. please mark the answer as correct or helpful.
sancherman
Contributor
Contributor

Sorry, this is the vmkernel

2015-06-25T16:14:46.055Z cpu1:76299)<6>ahci_scsi_abort: cmd 0x28 (0x412401651d40), entering...

2015-06-25T16:14:46.055Z cpu1:76299)<7>ata3: ahci_port_reset, entering...

2015-06-25T16:14:48.284Z cpu0:76299)<6>ata3: ahci_port_reset, hard reseting port

2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: exception Emask 0x10 SAct 0x1 SErr 0x10000 action 0xa frozen

2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: irq_stat 0x00400000, PHY RDY changed

2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3: SError: { PHYRdyChg }

2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: cmd 60/01:00:00:10:00/00:00:00:00:00/40 tag 0 ncq 512 in

         res 80/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)

2015-06-25T16:14:48.284Z cpu6:4632)<3>ata3.00: status: { Busy }

2015-06-25T16:14:49.031Z cpu2:4632)<6>ata3: soft resetting link

2015-06-25T16:14:49.031Z cpu2:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

2015-06-25T16:14:53.841Z cpu7:76299)<4>ata3: port is slow to respond, please be patient (Status 0x80)

2015-06-25T16:15:08.341Z cpu0:4632)<6>ata3.00: configured for UDMA/133

2015-06-25T16:15:08.341Z cpu0:4632)<6>ata3: EH complete

2015-06-25T16:15:08.379Z cpu3:76299)<6>ata3: ahci_port_reset: SUCCEEDED

2015-06-25T16:15:08.379Z cpu3:76299)<6>ahci_scsi_abort: cmd 0x28 (0x412401651d40), SUCCEEDED

2015-06-25T16:15:08.379Z cpu7:6605)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x28 (0x412400768b00, 5066) to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" on path "vmhba33:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense da$

2015-06-25T16:15:08.379Z cpu7:6605)ScsiDeviceIO: 2318: Cmd(0x412400768b00) 0x28, CmdSN 0x1 from world 5066 to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0xb 0x47 0x0.

2015-06-25T16:15:09.021Z cpu0:5066)ScsiDevice: 1463: Device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ  has been turned off administratively.

2015-06-25T16:15:18.716Z cpu6:5066)Vol3: 692: Couldn't read volume header from control: Not supported

2015-06-25T16:15:18.716Z cpu6:5066)Vol3: 692: Couldn't read volume header from control: Not supported

2015-06-25T16:15:18.716Z cpu6:5066)FSS: 4972: No FS driver claimed device 'control': Not supported

2015-06-25T16:15:18.751Z cpu6:5066)VC: 1547: Device rescan time 23 msec (total number of devices :smiling_face_with_sunglasses:

2015-06-25T16:15:18.751Z cpu6:5066)VC: 1550: Filesystem probe time 30 msec (devices probed 5 of :smiling_face_with_sunglasses:

2015-06-25T16:15:32.871Z cpu4:4981)ScsiDevice: 1470: Device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ  has been turned on administratively.

2015-06-25T16:15:35.873Z cpu4:6607)LVM: 13024: One or more LVM devices have been discovered.

2015-06-25T16:16:15.881Z cpu3:76299)<6>ahci_scsi_abort: cmd 0x35 (0x41240166b300), entering...

2015-06-25T16:16:15.881Z cpu3:76299)<7>ata3: ahci_port_reset, entering...

2015-06-25T16:16:18.121Z cpu7:76299)<6>ata3: ahci_port_reset, hard reseting port

2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen

2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: irq_stat 0x00400000, PHY RDY changed

2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3: SError: { PHYRdyChg }

2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0

         res 80/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x12 (ATA bus error)

2015-06-25T16:16:18.121Z cpu0:4632)<3>ata3.00: status: { Busy }

2015-06-25T16:16:18.873Z cpu2:4632)<6>ata3: soft resetting link

2015-06-25T16:16:18.873Z cpu2:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

2015-06-25T16:16:23.668Z cpu4:76299)<4>ata3: port is slow to respond, please be patient (Status 0x80)

2015-06-25T16:16:48.171Z cpu1:76299)<3>ata3: COMRESET failed (errno=-16)

2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3.00: qc timeout (cmd 0xec)

2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)

2015-06-25T16:16:48.894Z cpu2:4632)<3>ata3.00: revalidation failed (errno=-5)

2015-06-25T16:16:48.894Z cpu2:4632)<4>ata3: failed to recover some devices, retrying in 5 secs

2015-06-25T16:16:53.906Z cpu2:4632)<6>ata3: hard resetting link

2015-06-25T16:16:59.447Z cpu2:4632)<4>ata3: port is slow to respond, please be patient (Status 0x80)

2015-06-25T16:17:03.938Z cpu0:4632)<3>ata3: COMRESET failed (errno=-16)

2015-06-25T16:17:03.938Z cpu0:4632)<6>ata3: hard resetting link

2015-06-25T16:17:04.463Z cpu0:4632)<6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

2015-06-25T16:17:04.464Z cpu0:4632)<6>ata3.00: configured for UDMA/133

2015-06-25T16:17:04.464Z cpu0:4632)<6>ata3: EH complete

2015-06-25T16:17:04.575Z cpu5:76299)<6>ata3: ahci_port_reset: SUCCEEDED

2015-06-25T16:17:04.575Z cpu5:76299)<6>ahci_scsi_abort: cmd 0x35 (0x41240166b300), SUCCEEDED

2015-06-25T16:17:04.575Z cpu4:6605)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x35 (0x4124007b0040, 0) to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" on path "vmhba33:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data:$

2015-06-25T16:17:04.575Z cpu4:6605)ScsiDeviceIO: 2318: Cmd(0x4124007b0040) 0x35, CmdSN 0x4dfe from world 0 to dev "t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0xb 0x47 0x0.

2015-06-25T16:17:04.575Z cpu6:5085)ScsiDevice: 1271: Could not flush cache of local device t10.ATA_____ST2000DM0012D1CH164__________________________________W1E2DHNZ. Failure

End of log reached.

Reply
0 Kudos
cykVM
Expert
Expert

This looks like your disk (some Seagate 2TB ST2000DM001) is defective. Would try cheking this with a vendor tool (e.g. SeaTools) first.

What hardware are you on (mainboard/server type/model, storage controller [looks like onboard SATA?])

Is the (onboard) storage set to AHCI in BIOS and is the BIOS on latest version?

mannygarcia20
Contributor
Contributor

Looks like a drive failure. Any lights or warning on the hardware ?:smileyplain:

sancherman
Contributor
Contributor

Indeed guys , I tested with seatools and the disk is corrupt , should not work with a new one that I'll put , I again tell them , thank you very much for everything.

Reply
0 Kudos