VMware Cloud Community
jgswinkels
Enthusiast
Enthusiast
Jump to solution

How to proper install VMware tools under Windows Server 2012 RC

After installing  Windows Server 2012 RC VM is working fine.

After that I installed the VMware tools -> result -> black flashing screen .

Booting in F8 mode -> try to remove VMware tolls -> not installed ??

What can I do to recover this black flashing screen .

1 Solution

Accepted Solutions
Samcer
Expert
Expert
Jump to solution

Not 100% sure but I'd suggest you to check/download the vmtools package here: http://packages.vmware.com/tools

HTH

Sam

samcer| http://about.me/samcer | http://www.vm-support.it/ | @samuelecerutti

View solution in original post

10 Replies
Samcer
Expert
Expert
Jump to solution

Not 100% sure but I'd suggest you to check/download the vmtools package here: http://packages.vmware.com/tools

HTH

Sam

samcer| http://about.me/samcer | http://www.vm-support.it/ | @samuelecerutti
Willsatroyd
Contributor
Contributor
Jump to solution

I suffered from this too in VM Workstation 8.0.2.

Removing the VM graphics adapter from device manger fixed it for me (I chose to remove the driver files).

Let us know if it works for you.

Cheers.

Reply
0 Kudos
jgswinkels
Enthusiast
Enthusiast
Jump to solution

No, removing the drivers is not the solution -> It doesn't worked for me.

I downloaded the new tools according recommendations of SAM and installed these -> problem was gone.

I reinstalled a new server with default VMware tools -> same error -> blinking not accessable screen

Reverted to SAM's solution -> problem solved.

used iso VMware-tools-windows-x64-8.6.5-621624.ISO

Thanks SAM,

cheers.

Jan

Reply
0 Kudos
Willsatroyd
Contributor
Contributor
Jump to solution

Hello again,

After uninstalling VM tools completely, then installing v.8.6.5 I get the same issue. Anyway, that is a downgrade from the version installed with Workstation 8.0.3 (my version), which is v.8.8.2.

Perhaps the differences in our experience are attributable to the fact that I have not performed a clean install of the OS, or maybe the different products we are using. I will move my contributions to the Workstation forums instead.

Thanks,

Conan.

Reply
0 Kudos
agobum
Contributor
Contributor
Jump to solution

I Had the same problem and for me the solution was:

- poweroff

- change setting video display of VM enable Accelerate 3D Graphics

- restart the system

- repair tools

now it's all right

Reply
0 Kudos
ctranter
Contributor
Contributor
Jump to solution

thanks, this fixed my issue. was stuck at a blank screen with no logon prompts after attempting to install vmtools.

Reply
0 Kudos
VAPypr
Contributor
Contributor
Jump to solution

Agobum's solution worked for me.

Reply
0 Kudos
nilsbunger2
Contributor
Contributor
Jump to solution

Abogum's solution worked for me too.  I've never had a problem be fixed by turning ON the 3d acceleration before!    My problem was actually on Fusion 4, not ESXi5, but same thing worked.   Thank you!

Reply
0 Kudos
weedee
Contributor
Contributor
Jump to solution

Your instructions helped me too. Thanks Agobum. You're the man!

Reply
0 Kudos
Fluxblocker
Enthusiast
Enthusiast
Jump to solution

Worked for me, thanks!  I converted a 2012 R2 server P2V, and when I installed VMware Tools, it installed ok and the NIC driver worked for the vmnetx3 NIC, but in vSphere client, it said VMware Tools was not installed, and my display adapter wasn't letting me set a different screen res.  Each of these issues were fixed by installing this build of VMware Tools.  Thanks again!

Sam

Reply
0 Kudos