Hi,
Since ESXi host server has 2 HDDs only and RAID 1 is applied. Thus only 1 partition (datastore) was created after installed ESXi.
Thanks !!
The vmfs datastore created as part of the install is the partition you can use to keep VMs. If you dont have SAN.
the partitioning will cause no issues during migrations.
Below is an example of the partitions created on the local RAID when you install ESXi. The last one is the vmfs datastore.
partedUtil getptbl /vmfs/devices/disks/naa.600508b1001c5f0311d9d05196b3ac16
gpt
72957 255 63 1172058032
1 64 8191 C12A7328F81F11D2BA4B00A0C93EC93B systemPartition 128
5 8224 520191 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0
6 520224 1032191 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0
7 1032224 1257471 9D27538040AD11DBBF97000C2911D1B8 vmkDiagnostic 0
8 1257504 1843199 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0
9 1843200 7086079 9D27538040AD11DBBF97000C2911D1B8 vmkDiagnostic 0
2 7086080 15472639 EBD0A0A2B9E5443387C068B6B72699C7 linuxNative 0
3 15472640 1172057998 AA31E02A400F11DB9590000C2911D1B8 vmfs 0
Hi,
ESXi partitions is separated from the Datastore that you will create. So don't worry about that.
There is no big impact because all are in the same disks, but is local disks so dont expect to much performance(if need).
vMotion or live migrations are only possible between Storage Shared SAN. Not possible between local disks.
Hope this can help.