Highlighted
Contributor
Contributor

ESXi 5.5 ASUS H97M Plus, Intel I218-V "No Network Adapters" Error

Hello all!

I'm experimenting with ESXi on my home computer, but keep running into the "No Network Adapters" error, which I understand is because the 5.5 default drivers don't support the Intel I218-V on my Asus H97M-Plus motherboard.

I've looked through these forums and others, and understand that I can use the ESXi Customizer v2.7.2 to add the Intel drivers. The latest version I can find in a .VIB file is net-e1000e-2.3.2.x86_64 which don't seem to work. The latest version I can fine on Intel's site is e1000e-3.0.4. I've tried using the Customizer to insert that version without success.

Also, I'm trying to run ESXi from a bootable USB drive which I create from the ISO using Rufus-1.4.9

My system specs are:

Asus H97M-Plus

Intel 4790S

32GB DDR3-1600 RAM

What's the next step?

Thanks,

97 Replies
Highlighted
Contributor
Contributor

Hi,

i tried to change,

but i got error :

"Cannot apply VIB net-e1000e, it contains a payload file of unknown type ''."

may i know is there any error/mistake from me ?

0 Kudos
Highlighted
Enthusiast
Enthusiast

How are you trying to apply it?  Can you post your environment, the commands you used, and your output?

0 Kudos
Highlighted
Contributor
Contributor

Hi Everybody,

I bought the same Motherboard Asus H97M-Plus, I have installed my ESXI 5.5 with the ESXi-Customizer-v2.7.2 and with the right ethernet and ahci driver, esxi installation ended successfully.

Now each time my esxi tries to boot, it goes directly to the UEFI. Impossible to boot my esxi...

Hardware Configuration :

Asus H97M-Plus

Intel Core I5-4430

DDR3 2400Mhz 16Go

1x WD 250 Go (Esxi)

2x WD 1T

Here is my UEFI configuration (re Peter5656) :

boot --> Boot device control --> UEFI & Legacy OPROM

boot --> Secure boot menu --> OS type --> Other OS

boot --> Secure boot --> boot option #1 --> UEFI OS *device*

Advanced --> CPU Configuration --> Enable Intel VT


PCH Storage Configuration => SATA

SATA Mode selection => AHCI


Does anyone have any idea about my problem ?


0 Kudos
Highlighted
Enthusiast
Enthusiast

@Looping18: I had the same problem.  Fixed it by following this:

https://communities.vmware.com/message/1831114#1831114

Highlighted
Contributor
Contributor

my environment is windows 8.1,

i trying using esxi 5.5 update 1,

for the command i just click the esxi customizer 2.7.2

0 Kudos
Highlighted
Enthusiast
Enthusiast

I have found some bugs with Customizer 2.7.2, and it is no longer supported.  Can you try the process that worked for Umbriel instead?

https://communities.vmware.com/message/2411386#2411386

0 Kudos
Highlighted
Contributor
Contributor

workaround by umbriel needs linux right? My problem i didnt have linux.

would you please kindly help to give me link for download customized iso ?

0 Kudos
Highlighted
Enthusiast
Enthusiast

An ISO is too big to post here, and it's not necessary.

PowerShell is a standard Microsoft utility.  It's available for XP and bundled with Win 7 and 8.

See this for instructions:  http://www.v-front.de/p/esxi-customizer-ps.html

0 Kudos
Highlighted
Contributor
Contributor

how to use esxi customizer ps  to use local iso ? since i have problem with internet connection, and almost 1 hour there is no updates / hang in process :

"exporting the image file ... please be patient"

0 Kudos
Highlighted
Contributor
Contributor

Thx it works perfectly Smiley Happy

0 Kudos
Highlighted
Contributor
Contributor

Hi,

i tried again,

but now step by step upgrade, from e1000 driver version 1 upgrade to version 2, then to version 3.

it works.... thanks ...Smiley Happy

0 Kudos
Highlighted
Contributor
Contributor

Anyone know what the solution is to the "Cannot apply VIB net-e1000e, it contains a payload file of unknown type ''."  issue?

Running on Windows 7, using the ESXi-Customizer and the e1000e-3.1.0.2-glr.vib file...

After the decompression of the ISO, this is the log results:

[Sat 09/13/2014 13:57:33.87] Setting up the host profile ...

[Sat 09/13/2014 13:57:33.88] The original host profile XML file is "ESXi-5.5.0-20140902001-standard-1902802134" ...

[Sat 09/13/2014 13:57:33.89] Renaming it to "ESXi-Customizer".

[Sat 09/13/2014 13:57:33.90] Updating the host profile XML file ...

[Sat 09/13/2014 13:57:33.91] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\unxutils\sed.exe" -e "s#<name>.*</name>#<name>ESXi-Customizer</name>#I" -i "ESXi-Customizer"

[Sat 09/13/2014 13:57:33.93] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\unxutils\sed.exe" -e "s#<creator>.*</creator>#<creator>VMware, Inc. / ESXi-Customizer.v-front.de</creator>#I" -i "ESXi-Customizer"

[Sat 09/13/2014 13:57:33.96] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\unxutils\sed.exe" -e "s#<modifiedtime>.*</modifiedtime>#<modifiedtime>2014-09-13T17:57:33.000000+00:00</modifiedtime>#I" -i "ESXi-Customizer"

[Sat 09/13/2014 13:57:33.98] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\unxutils\sed.exe" -e "s#<description>.*</description>#<description>This is a VMware ESXi 5.x build customized by ESXi-Customizer 2.7.2</description>#I" -i "ESXi-Customizer"

[Sat 09/13/2014 13:57:34.00] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\unxutils\sed.exe" -e "s#<acceptancelevel>.*</acceptancelevel>#<acceptancelevel>community</acceptancelevel>#I" -i "ESXi-Customizer"

[Sat 09/13/2014 13:57:34.02] Checking vib file "e1000e-3.1.0.2-glr.vib" ...

[Sat 09/13/2014 13:57:34.02] Unpacking VIB-file ...

[Sat 09/13/2014 13:57:34.03] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\7zip\7z.exe" x -y -o"C:\Users\RonO\Documents\esxicust.tmp\vib" "D:\Ftran\Vmware\5.5_Offline_Bundle\e1000e-3.1.0.2-glr.vib"

7-Zip 9.20  Copyright (c) 1999-2010 Igor Pavlov  2010-11-18

Processing archive: D:\Ftran\Vmware\5.5_Offline_Bundle\e1000e-3.1.0.2-glr.vib

Extracting  descriptor.xml

Extracting  sig.pkcs7

Extracting  e1000e

Everything is Ok

Files: 3

Size:       114255

Compressed: 114444

[Sat 09/13/2014 13:57:34.05] Parsing "C:\Users\RonO\Documents\esxicust.tmp\vib\descriptor.xml" ...

set vibType=bootbank

set vibName=net-e1000e

set vibVersion=3.1.0.2-glr

set vibVendor=GLRoman

set vibPayloadName=e1000e

[Sat 09/13/2014 13:57:34.23] Counting payloads in "C:\Users\RonO\Documents\esxicust.tmp\vib\descriptor.xml" of "e1000e-3.1.0.2-glr.vib" ...

[Sat 09/13/2014 13:57:34.25] Exactly 1 payload found in "C:\Users\RonO\Documents\esxicust.tmp\vib\descriptor.xml". Good ...

[Sat 09/13/2014 13:57:34.25] Run: "D:\Ftran\Vmware\5.5\ESXi-Customizer-v2.7.2\tools\MsgBox.exe" 266288 "Cannot apply VIB net-e1000e, it contains a payload file of unknown type ''."

[Sat 09/13/2014 13:57:40.48] Cleaning up ...

[Sat 09/13/2014 13:57:40.48] Run: rmdir /s /q "C:\Users\RonO\Documents\esxicust.tmp"

[Sat 09/13/2014 13:57:40.69] This is the end.

Anyone know what the solution is to the "Cannot apply VIB net-e1000e, it contains a payload file of unknown type ''."  issue?

Thanks

RonO

0 Kudos
Highlighted
Contributor
Contributor

GLRoman wrote:

I have found some bugs with Customizer 2.7.2, and it is no longer supported.  Can you try the process that worked for Umbriel instead?

https://communities.vmware.com/message/2411386#2411386

I tried using the ESXi-Customizer-PS-v2.2.ps1 method, but something must be screwed somewhere on my setup, as whenever I try to do anythign with that script, even just run it to build a vanilla ISO, I get this:

PS D:\ftran\vmware\5.5> ./ESXi-Customizer-PS-v2.2.ps1

Script to build a customized ESXi installation ISO or Offline bundle

using the VMware PowerCLI ImageBuilder snapin

(Call with -help for instructions)

Running with PowerShell version 3.0 and VMware vSphere PowerCLI 5.8 Release 1 build 2057893

Connecting the VMware ESXi base depot ... [OK]

Get-EsxImageProfile : The parameter 'name' cannot be an empty string.

Parameter name: name

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:252 char:13

+             Get-EsxImageProfile -SoftwareDepot $baseDepot | foreach { $iplist += ...

+             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo          : NotSpecified: (:) [Get-EsxImageProfile], ArgumentException

    + FullyQualifiedErrorId : System.ArgumentException,VMware.ImageBuilder.Commands.GetProfiles

FATAL ERROR: No valid ImageProfile(s) found in input Offline bundle!

And when I try to -load the vib file this is what I get:

PS D:\ftran\vmware\5.5> ./ESXi-Customizer-PS-v2.2.ps1 -load D:\Ftran\Vmware\E1000e\e1000e-3.1.0.2-glr.vib

Script to build a customized ESXi installation ISO or Offline bundle

using the VMware PowerCLI ImageBuilder snapin

(Call with -help for instructions)

Running with PowerShell version 3.0 and VMware vSphere PowerCLI 5.8 Release 1 build 2057893

Connecting the VMware ESXi base depot ...Add-EsxSoftwareDepot : Cannot convert length string (inRamdis) to a number

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:199 char:22

+     if ($baseDepot = Add-EsxSoftwareDepot $vmwDepotURL) {

+                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo          : NotSpecified: (:) [Add-EsxSoftwareDepot], ProtocolViolationException

    + FullyQualifiedErrorId : System.Net.ProtocolViolationException,VMware.ImageBuilder.Commands.AddDepot

Get-EsxImageProfile : Cannot validate argument on parameter 'SoftwareDepot'. The argument is null or empty. Supply an

argument that is not null or empty and then try the command again.

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:252 char:48

+             Get-EsxImageProfile -SoftwareDepot $baseDepot | foreach { $iplist += ...

+                                                ~~~~~~~~~~

    + CategoryInfo          : InvalidData: (:) [Get-EsxImageProfile], ParameterBindingValidationException

    + FullyQualifiedErrorId : ParameterArgumentValidationError,VMware.ImageBuilder.Commands.GetProfiles

FATAL ERROR: No valid ImageProfile(s) found in input Offline bundle!

Seems every time I try using that I get that same last message... FATAL ERROR: No valid ImageProfile(s) found in input Offline bundle!

0 Kudos
Highlighted
Enthusiast
Enthusiast

@RonOlshavsky: When creating a custom ISO, you should use the offline bundle.  The VIB is used to patch an already installed host.

Download the offline bundle and use the -obDir switch with ESXi-Customizer-PS.

0 Kudos
Highlighted
Contributor
Contributor

GLRoman wrote:

@RonOlshavsky: When creating a custom ISO, you should use the offline bundle.  The VIB is used to patch an already installed host.

Download the offline bundle and use the -obDir switch with ESXi-Customizer-PS.

Thanks for the reply...

When I try that, using the Powershell script, I get the message I posted about previously...

Example, when using the -obDir option, with the net-e1000e-3.1.0.2-glr-offline_bundle.zip file in the specified directory, I get this:

PS D:\ftran\vmware\5.5> ./ESXi-Customizer-PS-v2.2.ps1 -obDir D:\Ftran\Vmware\E1000e

Script to build a customized ESXi installation ISO or Offline bundle

using the VMware PowerCLI ImageBuilder snapin

(Call with -help for instructions)

Running with PowerShell version 3.0 and VMware vSphere PowerCLI 5.8 Release 1 build 2057893

Connecting the VMware ESXi base depot ...Add-EsxSoftwareDepot : Cannot convert length string (.0</name) to a number

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:199 char:22

+     if ($baseDepot = Add-EsxSoftwareDepot $vmwDepotURL) {

+                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo          : NotSpecified: (:) [Add-EsxSoftwareDepot], ProtocolViolationException

    + FullyQualifiedErrorId : System.Net.ProtocolViolationException,VMware.ImageBuilder.Commands.AddDepot

Get-EsxImageProfile : Cannot validate argument on parameter 'SoftwareDepot'. The argument is null or empty. Supply an

argument that is not null or empty and then try the command again.

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:252 char:48

+             Get-EsxImageProfile -SoftwareDepot $baseDepot | foreach { $iplist += ...

+                                                ~~~~~~~~~~

    + CategoryInfo          : InvalidData: (:) [Get-EsxImageProfile], ParameterBindingValidationException

    + FullyQualifiedErrorId : ParameterArgumentValidationError,VMware.ImageBuilder.Commands.GetProfiles

FATAL ERROR: No valid ImageProfile(s) found in input Offline bundle!

0 Kudos
Highlighted
Enthusiast
Enthusiast

Looks like you can't even download the ESXi offline bundle.  Try this all by itself:

d:\> ESXi-Customizer-PS-v2.2.ps1 -ozip -ipname "My Lab" -ipdesc "My Test Env" -ipvendor "Me, Inc."

and see what happens.

0 Kudos
Highlighted
Contributor
Contributor

Here's the result:

PS D:\ftran\vmware\5.5> ./ESXi-Customizer-PS-v2.2.ps1 -ozip -ipname "My Lab" -ipdesc "My Test Env" -ipvendor "Me, Inc."

Script to build a customized ESXi installation ISO or Offline bundle

using the VMware PowerCLI ImageBuilder snapin

(Call with -help for instructions)

Running with PowerShell version 3.0 and VMware vSphere PowerCLI 5.8 Release 1 build 2057893

Connecting the VMware ESXi base depot ... [OK]

Get-EsxImageProfile : The parameter 'name' cannot be an empty string.

Parameter name: name

At D:\ftran\vmware\5.5\ESXi-Customizer-PS-v2.2.ps1:252 char:13

+             Get-EsxImageProfile -SoftwareDepot $baseDepot | foreach { $iplist += ...

+             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    + CategoryInfo          : NotSpecified: (:) [Get-EsxImageProfile], ArgumentException

    + FullyQualifiedErrorId : System.ArgumentException,VMware.ImageBuilder.Commands.GetProfiles

FATAL ERROR: No valid ImageProfile(s) found in input Offline bundle!

PS D:\ftran\vmware\5.5>

0 Kudos
Highlighted
Enthusiast
Enthusiast

0 Kudos
Highlighted
Contributor
Contributor

Thanks again for the reply, and the help...

Looks like I'm SoL at the moment, so Im gonna have to go get a 'supported' Nic card I guess...

Anyway, thanks again for the assistance...

0 Kudos
Highlighted
Contributor
Contributor

Hi GLRoman,

I managed to follow kickstarter's guide on how to create a build environment, and debug the compilation:

vm-help.com - View topic - ESXI 5.x Drivers Part 1: Making a Build Environment

vm-help.com - View topic - ESXI 5.x Drivers Part 2: Preparing to compile

vm-help.com - View topic - ESXI 5.x Drivers Part 3: Compiling

vm-help.com - View topic - ESXI 5.x Drivers Part 4: Finishing the compilation

I have got to the point of successfully compiling 80003es2lan.c, 82571.c, ethtool.c, ich8lan.c, kcompat_ethtool.c, mac.c, manage.c, nvm.c, param.c, phy.c and vmklinux_module.c, however I'm still struggling with kcompat.c, netdev.c and ptp.c, giving me the following errors:

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c: In function '__kc_adapter_clean':

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:975: error: 'struct net_device' has no member named 'quota'

cc1: warnings being treated as errors

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:975: warning: type defaults to 'int' in declaration of '_y'

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:975: error: 'struct net_device' has no member named 'quota'

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:986: error: 'struct net_device' has no member named 'quota'

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c: In function '_kc_simple_open':

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:1246: error: 'struct inode' has no member named 'u'

vmkdrivers/src_9/drivers/net/e1000e/kcompat.c:1247: error: 'struct inode' has no member named 'u'

cc1: warnings being treated as errors

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_alloc_rx_buffers_ps':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:802: warning: implicit declaration of function 'alloc_pages_node'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:803: warning: assignment makes pointer from integer without a cast

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_alloc_jumbo_rx_buffers':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:915: warning: assignment makes pointer from integer without a cast

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_intr_msi':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:1950: error: too few arguments to function 'netif_rx_schedule_prep'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:1955: error: too few arguments to function '__netif_rx_schedule'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_intr':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:2052: error: too few arguments to function 'netif_rx_schedule_prep'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:2057: error: too few arguments to function '__netif_rx_schedule'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_intr_msix_rx':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:2147: error: too few arguments to function 'netif_rx_schedule_prep'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:2150: error: too few arguments to function '__netif_rx_schedule'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000e_poll':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:2919: error: too few arguments to function 'netif_rx_complete'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_open':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:4917: warning: implicit declaration of function 'netif_poll_enable'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_close':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:4983: warning: implicit declaration of function 'netif_poll_disable'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_tso':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:5791: warning: implicit declaration of function 'skb_cow_head'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c: In function 'e1000_probe':

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:7672: error: 'struct net_device' has no member named 'poll'

vmkdrivers/src_9/drivers/net/e1000e/netdev.c:7672: error: 'struct net_device' has no member named 'weight'

cc1: warnings being treated as errors

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:38: warning: 'struct ptp_clock_info' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:38: warning: its scope is only this definition or declaration, which is probably not what you want

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: In function 'e1000e_phc_adjfreq':

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:40: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:40: warning: type defaults to 'int' in declaration of '__mptr'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:40: warning: initialization from incompatible pointer type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:40: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:49: error: dereferencing pointer to incomplete type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:58: warning: implicit declaration of function 'e1000e_get_base_timinca'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:62: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:68: warning: implicit declaration of function 'div_u64'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:77: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: At top level:

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:89: warning: 'struct ptp_clock_info' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: In function 'e1000e_phc_adjtime':

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:91: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:91: warning: type defaults to 'int' in declaration of '__mptr'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:91: warning: initialization from incompatible pointer type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:91: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:96: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:97: warning: implicit declaration of function 'timecounter_read'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:97: error: 'struct e1000_adapter' has no member named 'tc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:99: warning: implicit declaration of function 'timecounter_init'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:99: error: 'struct e1000_adapter' has no member named 'tc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:99: error: 'struct e1000_adapter' has no member named 'cc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:100: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: At top level:

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:113: warning: 'struct ptp_clock_info' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: In function 'e1000e_phc_gettime':

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:115: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:115: warning: type defaults to 'int' in declaration of '__mptr'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:115: warning: initialization from incompatible pointer type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:115: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:121: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:122: error: 'struct e1000_adapter' has no member named 'tc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:123: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:125: warning: implicit declaration of function 'div_u64_rem'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: At top level:

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:140: warning: 'struct ptp_clock_info' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: In function 'e1000e_phc_settime':

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:142: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:142: warning: type defaults to 'int' in declaration of '__mptr'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:142: warning: initialization from incompatible pointer type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:142: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:150: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:151: error: 'struct e1000_adapter' has no member named 'tc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:151: error: 'struct e1000_adapter' has no member named 'cc'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:152: error: 'struct e1000_adapter' has no member named 'systim_lock'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: At top level:

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:168: warning: 'struct ptp_clock_request' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:168: warning: 'struct ptp_clock_info' declared inside parameter list

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: In function 'e1000e_systim_overflow_work':

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:175: error: 'struct e1000_adapter' has no member named 'systim_overflow_work'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:175: warning: type defaults to 'int' in declaration of '__mptr'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:175: warning: initialization from incompatible pointer type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:175: error: 'struct e1000_adapter' has no member named 'systim_overflow_work'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:180: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:180: error: 'struct e1000_adapter' has no member named 'ptp_clock_info'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:184: error: 'struct e1000_adapter' has no member named 'systim_overflow_work'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:185: error: 'E1000_SYSTIM_OVERFLOW_PERIOD' undeclared (first use in this function)

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:185: error: (Each undeclared identifier is reported only once

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:185: error: for each function it appears in.)

vmkdrivers/src_9/drivers/net/e1000e/ptp.c: At top level:

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:188: error: variable 'e1000e_ptp_clock_info' has initializer but incomplete type

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:189: error: unknown field 'owner' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:189: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:189: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:190: error: unknown field 'n_alarm' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:190: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:190: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:191: error: unknown field 'n_ext_ts' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:191: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:191: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:192: error: unknown field 'n_per_out' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:192: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:192: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:193: error: unknown field 'pps' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:193: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:193: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:194: error: unknown field 'adjfreq' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:194: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:194: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:195: error: unknown field 'adjtime' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:195: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:195: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:196: error: unknown field 'gettime' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:196: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:196: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:197: error: unknown field 'settime' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:197: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:197: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:198: error: unknown field 'enable' specified in initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:198: warning: excess elements in struct initializer

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:198: warning: (near initialization for 'e1000e_ptp_clock_info')

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:209: error: expected identifier or '(' before 'do'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:209: error: expected identifier or '(' before 'while'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:263: error: expected identifier or '(' before 'do'

vmkdrivers/src_9/drivers/net/e1000e/ptp.c:263: error: expected identifier or '(' before 'while'

Any tips how you did it in your build environment?

Thanks!

0 Kudos