I hope that someone can helo me with this issue:
ESXI 5.0 worked perfectly
Can anyone please help me with this issue?
Best regards Tor
See attachment image
Hi and welcome to the communities,
first of all, have you really tried if the VMs have no network connection? Because I have a server that also shows networks: none (CDP disabled on the physical switch) on a BCM5715 and it works fine.
Have you installed the stock VMware ESXi Image or the customized from Dell?
I'm running a R515 with the Broadcom Nextreme II BCM5716 and ESXi 5.1 and it's working fine with this driver:
Regards
Hi,
There are couple of things that I would like you to verify.
The cable connected to the switch from the NIC card is fine.
Is the switch port configured properly.
I think the drivers are fine as the card is getting detected and shows status as connected
Tim wrote:
first of all, have you really tried if the VMs have no network connection?
Please verify this, since it might very well work already. The "observed network ranges" and similar is not always accurate, so if not have done so already create a VM with a suitable IP and see if it could communicate with the outside world.
Thank you for your reply.
Come and kick my ass.....!! . You guys were right. It has worked all the time. Thanks a lot.
Best regards Tor