hello ,
we have upgraded our ESXi Cluster from ESXi 5.1 U to ESXi 5.5 u1, After up gradation ESXi servers crashing randomly with lot of SCSI errors.
We are using IBM SVC. what will happend if we not configure correct the multipath policy to ESXi servers ?
regards
Surya
Message was edited by: Tim Scheppeit As the log is too long, I removed it from the post and attached it in a seperate file
Try to apply latest ESXi 5.5 patches (5.5.0c) for resolving issue.
I suggest you to contact VMware support.
Yes, it is better to upgrade to latest patch for some critical security issues i.e heartbleed.
Hi,
we are having the same problems with ESXi 5.5.0 U2 and SVC.
The error messages are the same as in your log:
nmp_ThrottleLogForDevice:2322: Cmd 0x2a (0x412f07c0e0c0, 67956) to dev "naa.60050234019e82234800000000000409" on path "vmhba3:C0:T1:L48" Failed: H:0xc D:0x0 P:0x0 Possible sense data: 0x0 0x0 0x0. Act:NONE
and
WARNING: VSCSIFs: 319: handle 26886(vscsi0:0):Failed reset of virtual target 362348740, (initiator 0x410b2a234d40, 0): Failure
Did you solve your issue?
Regards
Bastian
Its problem with overload of SVC cache. please check with your storage team.
Please conduct a test to see if its the storage or the ESXi, try using the same esxi version in lab with software based storage such as openfiler and test it, if it still crashes, apply the patch if not, you know the problem then!
HTH