Not sure why I'm banging my head on the wall for what should be a simple installation procedure.
I have a Dell PowerEdge R610 server with a fresh install of ESXi 5 Enterprise Plus (Build 469512--neither of the two available patches have been installed because we don't use vShield or iSCSI in this environment). I'm attempting to install the Dell OpenManage Server Assistant VIB so that I can monitor/manage the PERC controller without having to use the BIOS menus.
I read this Dell blog entry...
...which instructed to download this file (my MD5 checksum is 0a485f2bc754a9aeb99e6caa26ae5863)...
...and follow these instructions for installation...
Specifically, here are the exact steps from that doc:
1. Copy the Dell_OpenManage_ESXi_OM650-offline_bundle-467660.zip
file to the /var/log/vmware folder on the ESXi5.0 server.
2. Shut down all guest operating systems on the ESXi host and run the ESXi
host in maintenance mode.
3. If you are using Windows, navigate to the directory in which you have
installed the vSphere CLI utilities to run the command mentioned
in step 4.
If you are using vSphere CLI on Linux, you can run the command in step 4
from any directory.
4. Run the following command:
esxcli --server <IP Address of ESXi 5.0 host>
software vib install -d /var/log/vmware/<Dell
5. Type the root user name and password of the ESXi host when prompted.
The command output displays a successful update.
6. Restart the ESXi host system.
Unfortunately, here's what I get from step #4:
C:\Program Files\VMware\VMware vSphere CLI>esxcli --server 10.5.115.62 software
vib install -d /var/log/vmware/Dell_OpenManage_ESXi_OM650-offline_bundle-467660.
Enter username: root
Error in copying from /bootbank/ata-pata.v01 to /altbootbank/ata-pata.v01: [Err
no 2] No such file or directory: '/altbootbank/ata-pata.v01'
vibs = set(['VMware_bootbank_net-ixgbe_126.96.36.199.2-10vmw.500.0.0.469512',
w.500.0.0.469512', 'VMware_bootbank_uhci-usb-uhci_1.0-3vmw.500.0.0.469512', 'VMw
0.0.469512', 'VMware_bootbank_ata-pata-sil680_0.4.8-3vmw.500.0.0.469512', 'VMwar
vmw.500.0.0.469512', 'VMware_bootbank_scsi-hpsa_5.0.0-17vmw.500.0.0.469512', 'VM
.0.469512', 'VMware_bootbank_net-forcedeth_0.61-2vmw.500.0.0.469512', 'VMware_bo
0.469512', 'VMware_bootbank_net-sky2_1.20-2vmw.500.0.0.469512', 'Dell_bootbank_O
penManage_6.5-0000', 'VMware_bootbank_esx-tboot_5.0.0-0.0.469512', 'VMware_bootb
188.8.131.52-1vmw.500.0.0.469512', 'VMware_bootbank_esx-base_5.0.0-0.0.469512', 'VMw
69512', 'VMware_bootbank_scsi-ips_7.12.05-4vmw.500.0.0.469512', 'VMware_bootbank
512', 'VMware_bootbank_sata-sata-svw_2.3-3vmw.500.0.0.469512', 'VMware_bootbank_
2', 'VMware_bootbank_misc-cnic-register_1.1-1vmw.500.0.0.469512', 'VMware_bootba
, 'VMware_bootbank_net-enic_184.108.40.206a-1vmw.500.0.0.469512', 'VMware_bootbank_ata
vmw.500.0.0.469512', 'VMware_bootbank_sata-sata-nv_3.5-3vmw.500.0.0.469512', 'VM
.469512', 'VMware_bootbank_scsi-aacraid_220.127.116.11-9vmw.500.0.0.469512', 'VMware_bo
0.469512', 'VMware_bootbank_net-bnx2x_1.61.15.v50.1-1vmw.500.0.0.469512', 'VMwar
Please refer to the log file for more details.
C:\Program Files\VMware\VMware vSphere CLI>
From what I can gather, it appears to choke when trying to back up the installed firmware to the altbootbank prior to performing the upgrade. This has happened on two different boxes at this point (the first was a Precision 490 workstation).
The only thing that comes to mind is that I'm using 2gb USB flash drives as the boot device. Should this make a difference and cause the VIB install to fail?
I guess a secondary question would be, does anyone know of a VIB injection method similar to the below which has been confirmed to work for ESXi 5 ISOs, so that I don't have to bother with a separate installation at all?
Thanks in advance for any ideas on either.
Can you check your esxupdate logs that should be there in /var/log/vmware (guess ..) to see if it is a space problem .. also please check how much space you have ..why not keep the patch bundle in a VMFS volume which has space ..
@Raj - I'm installing from /var/log/vmware because the instructions from Dell explicitly state to use that location.
Space doesn't appear to be an issue since the USB drive is 2gb instead of the required 1gb. Furthermore, the VIB is less than 5mb:
/var/log/vmware # ls -l Dell_OpenManage_ESXi_OM650-offline_bundle-467660.zip
-rw-r--r-- 1 root root 4913570 Nov 23 14:40 Dell_OpenManage_ESXi_OM650-offline_bundle-467660.zip
To be 100% sure, though, I copied the VIB to a datastore (local 1TB disk) and tried installing from there, but got the same result.
@Andre - Thanks, I've come across your blog post on the matter before. Unfortunately, I don't have a VUM setup and therefore have to rely upon the more manual methods.
It appears that PowerCLI will allow the VIB to be integrated into a standard ESXi 5 ISO, so I'll try playing with that and see how it goes.
I have the exact same issue on Dell R710s. Originally I tried installing the VIB via CLI. "esxcli software vib list" in fact lists "OpenManage 6.5-0000", however, I still cannot access OMSA on the host via the Dell vCenter Plugin. UserVars.CIMvmw_OpenManageProviderEnabled is set to "1" and reboots have been performed. It's a head scratcher.
After messing with it for a while, I decided (like you) to use the Image Builder in PowerCLI to package the Dell OMSA VIB along with the ESXi 5 install. My iso installs flawlessly and the OMSA is installed just like previously BUT still no connectivity to OMSA. Let me know if you have any luck with the install. Otherwise, hopefully someone else has solved this issue and could shed some light.
What are you using as a OMSA "proxy"? I've only tried with a Windows Server 2008 R2, and I'm sure that with XP does not work at all (it give internal server error)
I managed to install OpenManage 6.5 on my R710 after hours of struggling.
Step 1: Download the Offline Bundle from the link below
Step 2: Install the vSphere CLI 5 client on your workstation/server you will use
Step 3: Upload the Offline Bundle file to your DataStore. I placed the file within a folder named "Install" on my DataStore
Step 4: Connect to your ESXi 5.0 server with the vSphere Client and click the Configuration Tab. Click on Storage, select your DataStore from within the DataStores window pane. Take note of the Location:
Step 5: Put your server in "Maintenance Mode"
Step 6: Install OpenManage 6.5 using the following command: esxcli --server IP Address software vib install -d "Location Path Your Took note Of"/Install/Dell_OpenManage_ESXi_OM650-offline_bundle-467660.zip
My command was: esxcli --server IP Address software vib install -d /vmfs/volumes/4ed790fa-53e451ba-dbfc-782bcb5b872a/Install/Dell
Enter your root credentials and voila!
Step: 7 Reboot your server and exit Maintenance Mode. No need to enable CIM OEM providers, it's turned on by default.
Thanks for your post. It worked perfectly on one machine, but not on the second ESXi 5.0 machine. But, it turns out that you can use [datastore] in place of the GUID, making it a bit easier.
Internal server IP address is: 172.16.9.99
Datastore is (creatively) called: datastoreA
I downloaded Dell OpenManage Server Administrator (OMSA) monitoring agent from
and copied it to the datastore, in a newly-created directory: Dell
This is the command I used:
C:\Program Files\VMware\VMware vSphere CLI>esxcli --server 172.16.9.99 software vib install -d [datastoreA]/Dell/OM-SrvAdmin-Dell-Web-6.5.0-542907.VIB-ESX50i_A02.zip
and it seemed to work:
I installed Dell_OpenManage_ESXi_OM650-offline_bundle-467660.zip into a vsphere 5.0 host.
Then I installed the Server Administrator 6.5.0 into another windows 2003 server. The I launch the site and enter the hostname, user and password using IE 8.
However I still get the error Login Failed, certificate error.
I already accepted the certficate at the broswer level and save it.
Any idea how to resolve this?
I manage to clear the Logon Failed, Certificate error.
However now I get the Logon Failed, Internal Error.
Any ideas how to resovled? Still can't manage to get into OM.
The server where OM Admin is installed run on win 2003.
I am having the same problem. The Dell VIB installs fine but I can't access it from Server Adminstrator or from a browser at https:\\<eix5 host ip>:1311. I did a port scan and nothing is running on port 1311. It seems like the web service on esxi is not running. Is there a way to check this?
I discovered that it can be a bit buggy, since OMSA 6.5 wasn't fully and officially supported in ESXi 5.0 enviroments by Dell.
In December they released a supported OMSA agent for ESXi 5.0, that can be downloaded from here.
Make sure your ESXi 5.0 hosts are running on the latest version/patches as well.
You confirmed that OMSA installed? - 'esxcli software vib list |grep open' and confirmed that the CIMoemProviderEnabled field is set to 1?
verify that the services are enabled and working: /usr/lib/ext/dell/srvadmin/bin/dataeng status
I have all the stuff running and up as below. However still I am not able to connected via OMSA 6.5.0 installed on a windows 2003 server.
~ # /etc/init.d/wsman status
openwsmand is running
~ # /usr/lib/ext/dell/srvadmin/bin/dataeng status
dsm_sa_datamgrd (pid 3470 ) is running
dsm_sa_eventmgrd (pid 3511 ) is running
dsm_sa_snmpd (pid 3522 ) is running
~ # esxcli software vib list |grep Open
OpenManage 6.5-0000 Dell VMwareAccepted 2012-01-19
CIMoemProviderEnabled is set to 1.
I still getting the error "Logon Failed, Internal Error". Not sure what does the error means. There is no log file really mention what is actual issue here.