Hi,
Seems that the Nic' drivers are not getting detected. Try installing the Custom Image from the Hardware for eg : if its dell try the dell Image or Hp try the HP image.
It would have the custom NIC drivers and that Should work.
Thanks,
Avinash
Hi,
thank you, but my Server is a self builded System with a Intel i7 4771 and the Intel DH87RL
Motherboard. I believe, that Dell or Hp dont have the right image for me.
Improve me please, if I'm wrong.
Thank you as far as, for the fast answer!
sliZe
Hi,
What about the Network Cards..?? what make and model is that.??
The NIC is the onboard Lan, its a Intel i217-v
See this thread, same issue: Ethernet driver issue.
Here's another link to a blog which explains how to create a custom ISO/CD with the required drivers.
http://www.virten.net/2013/09/esxi-5-x-installation-on-intel-nuc-fails-with-no-network-adapters/
André
Thank you! I have sended a message to the thread master and i hope he can give me the image!
Thank you too, I'm trying it now - hope it works...
I agree with Andre to go with the Custom Image.!!
Thanks,
Avinash
Thank you all so much! It works! I used the link from André!
Hi Slize
Since last two days I was facing the same issue with DH87MC as it uses the same network controller. Finally I managed to get it work for my PC with desktop board intel DH87MC (Network Controller I217v).
Attached is the driver's .VIB file that I used injected it to original ISO using ESXi Customizer, it should work for you too.
Regards
Hari
Thanks for sharing your solution.
Btw. the link I provided earlier in this thread provides a walk-through on how to create a custom image including the driver you mentioned.
André