Hello
Tjhe agent logs contains:
2012-01-17T14:23:26.648+04:00 [04544 warning 'Default'] [,0] [NFC ERROR] NfcNewAuthdConnectionEx: Failed to connect to peer. Error: Failed to connect to server 192.168.10.1:902
The agent at source machine must be able to connect to the destination ESX at port 902. You may check your firewall(s).
Also check whether the source machine can resolve correctly this internal IP address. If not and the ESX has another IP, you may try conversiom to ESX directly ny entering the 'external' IP. Be aware though, that if it is ESX 5.0 you should detach it from the VC, otherwise converter will give an error.
HTH
Plamen
Can you please upload the agent logs. They are missing from the zip. You can find them at the source machine in
%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone Agent\logs.
Regards,
Plamen
P.S. BTW the log reports the source as W2003 R2, I suppose 2008 is a typo?
You chose to resize two of the four hard disks, and it looks like cloning fails with exactly these disks.
Try to NOT resize all the disks and see if it works then.
If you do not resize a disk Converter will use volume based cloning, and if you resize a disk Converter is forced to use file based cloning which does not work in some cases (e.g. when using dynamic disks).
- Andreas
I see "non ASCII symbols in GetUserName", sometimes this makes a problems, Try with other, ascii only, user name.
The same issue could be with non ASCII paths.
Also check that ESX 192.168.10.1 is visible from the Converter Server side.
HTH
Hi,
I try with not resize disk and with "non ASCII symbols in GetUserName" but I have the same error.
In the log file, i see this message:
[2012-01-18 15:51:26.275 01508 warning 'Libs'] SSLVerifyCertAgainstSystemStore: The remote host certificate has these problems:
* The host certificate chain is not complete.
I've regenerate the SSL certificate but I have always the problème.
Help
Hello
Tjhe agent logs contains:
2012-01-17T14:23:26.648+04:00 [04544 warning 'Default'] [,0] [NFC ERROR] NfcNewAuthdConnectionEx: Failed to connect to peer. Error: Failed to connect to server 192.168.10.1:902
The agent at source machine must be able to connect to the destination ESX at port 902. You may check your firewall(s).
Also check whether the source machine can resolve correctly this internal IP address. If not and the ESX has another IP, you may try conversiom to ESX directly ny entering the 'external' IP. Be aware though, that if it is ESX 5.0 you should detach it from the VC, otherwise converter will give an error.
HTH
Plamen
Hi,
It's all right now ( the agent could not see the ESXI).
thank you for your attention
Set DNS on source