Hi,
why Converter cannot see Linux Swap partitions? I created a VM with no issues, except for the fact that it does not contain the second partition of the physical server at all. Here is the original layout. VM contains only the first and the third partition.
# fdisk -l
Disk /dev/cciss/c0d0: 146.8 GB, 146807930880 bytes
255 heads, 32 sectors/track, 35139 cylinders
Units = cylinders of 8160 * 512 = 4177920 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 26 106064 83 Linux
/dev/cciss/c0d0p2 27 1054 4194240 82 Linux swap / Solaris
/dev/cciss/c0d0p3 1055 35139 139066800 83 Linux
Hm, the SWAP partition is recognized properly
--> <partition number="2" type="primary" isActive="false" fileSystemType="linux-swap"> --> <device path="/dev/cciss/c0d0p2" major="104" minor="2"/> --> <lba start="212160" length="8388480" end="8600639"/> --> </partition>
However, there is no volume that is corresponding to this partition. The only recognized volumes are "/" and "/boot" (no swap). Is this swap partition activated?
Converter is detecting the active SWAP partitions through iterating /proc/swaps file. What is the output of
# cat /proc/swaps
on the source?
Message was edited by: ivivanov
Updated the partition info pasted from the log with the "right" wrong partition 🙂
Hm, this is strange, it should work... can you export a log bundle of the conversion task?
Since it produces a lot of logs, could you please let me know which file you want?
The worker and the helper logs are most useful. There should be an XML output in it describing the detected source machine configuration (specifically recognized volumes).
Hm, the SWAP partition is recognized properly
--> <partition number="2" type="primary" isActive="false" fileSystemType="linux-swap"> --> <device path="/dev/cciss/c0d0p2" major="104" minor="2"/> --> <lba start="212160" length="8388480" end="8600639"/> --> </partition>
However, there is no volume that is corresponding to this partition. The only recognized volumes are "/" and "/boot" (no swap). Is this swap partition activated?
Converter is detecting the active SWAP partitions through iterating /proc/swaps file. What is the output of
# cat /proc/swaps
on the source?
Message was edited by: ivivanov
Updated the partition info pasted from the log with the "right" wrong partition 🙂
You are right. There was an issue with the label name in fstab and it was not activated. Sorry for this. Thanks for your time.
Thank you for your message. I am currently out of the office and will return Nov 26.
For support related issues please contact the IT Service Desk servicedesk@camhydro.com or x2700.
Thank you
Heath