Hi Guys,
I need your quick and helpful response for following problem. I have a
customer and I am in process to deploying the VCB proxy services on a physical
for backing up the Virtual Machine.
The VCB proxy services installed on Physical server which have around
90 GB of free space on C: Drive (Local storage) and have installed two Emulex
HBA of single port. The VMFS volume that I have mapped to ESX
server and VCB proxy machine has only one Virtual machine running on it.
I am able to see the SAN LUN (VMFS
Volume) in disk management as unallocated space. The power path
Software installed as MPIO in the machine and I am able to see the LUN in disk
management using only one PATH.
After all of the configuration I am able to get the result of
VCBVMNAME.exe command and also able to create the snapshot for a VM from the
command prompt of the VCB machine.
The problem comes when I try to run the VCBMOUNTER command for a VM, it runs
normally but when it try to export the .vmdk file, it gives following error
warning, I am not worry regarding the warning of SSL but it fails the
vcbmounter result.
-----
-----e:443]: GetName
[2009-07-15 13:39:58.024 'vcbMounter' 2524 info] Exporting VM config files
[2009-07-15 13:39:58.024 'SOAP' 2524 trivia]
Sending soap request to [TCP:dclsma01.dm.ae:443]:
retrieveInternalContent
[2009-07-15 13:39:58.209 'SOAP' 2524 trivia]
Received soap response from [TCP:dclsma01.dm.ae:443]:
retrieveInternalContent
[2009-07-15 13:39:58.209 'SOAP' 2524 trivia]
Sending soap request to [TCP:dclsma01.dm.ae:443]:
getVmFiles
[2009-07-15 13:39:58.440 'SOAP' 2524 trivia]
Received soap response from [TCP:dclsma01.dm.ae:443]:
getVmFiles
[2009-07-15 13:39:58.440 'App' 2524 info] Establishing NFC connection to host
dclesx11.dm.ae on port 902, service vpxa-nfc
Copying "[test_vmfs] test/test.vmx":
0%=====================50%=====================100%
**************************************************
Copying "[test_vmfs] test/test.nvram":
0%=====================50%=====================100%
**************************************************
Copying "[test_vmfs] test//vmware.log":
0%=====================50%=====================100%
*************************************************
[2009-07-15 13:39:59.194 'vcbMounter' 2524 info] Exporting disks
[2009-07-15 13:39:59.194 'vcbMounter' 2524 info] Filenames:
blklst://snapshot-2482[test_vmfs]
c:\mnt\test_fullvm\scsi0-0-0-test.vmdk
[2009-07-15 13:39:
* The host name used for the connection does not match the subject name on the
host certificate
* A certificate in the host's chain is based on an untrusted root.
[2009-07-15 13:40:01.811 'BaseLibs' 2524 warning] SSLVerifyIsEnabled: failed to
read registry value. Assuming verification is disabled. LastError = 0
[2009-07-15 13:40:01.811 'BaseLibs' 2524 warning]
SSLVerifyCertAgainstSystemStore: Certificate verification is disabled, so
connection will proceed despite the error
[2009-07-15 13:40:01.980 'App' 2524 verbose] Blockmap fetch completed.
[2009-07-15 13:40:01.980 'App' 2524 trivia] Attempting to open LVID:4a5c2a28-b3e382cc-b786-001f290b054e/4a5c2a28-85cdfb92-5589-001f290b054e/1.
[2009-07-15 13:40:01.980 'App' 2524 error] No path to device LVID:4a5c2a28-b3e382cc-b786-001f290b054e/4a5c2a28-85cdfb92-5589-001f290b054e/1
found.
[2009-07-15 13:40:01.980 'BlockList' 2524 error]
[2009-07-15 13:40:01.980 'SOAP' 2524 trivia]
Sending soap request to [TCP:dclsma01.dm.ae:443]:
release
[2009-07-15 13:40:02.319 'BlockList' 2524 info] Closing connection
dclsma01.dm.ae:vcbuser
[2009-07-15 13:40:02.319 'SOAP' 2524 trivia]
Sending soap request to [TCP:dclsma01.dm.ae:443]:
logout
[2009-07-15 13:40:02.473 'vcbMounter' 2524 error] Error: Failed to open the
disk: Cannot access a SAN/iSCSI LUN backing
this virtual disk. (Hint: If you are using vcbMounter you can use the option
"-m ndb" to switch to network based disk access if this is what you
want.) If you were attempting file-level access, stop the vmount Service by
typing "net stop vmount2" on a command prompt to force vmount to
re-scan for SAN LUNs and re-try the command.
[2009-07-15 13:40:02.473 'vcbMounter' 2524 error] An error occurred, cleaning
up...
-----
I have also run vcbsandiagnostic command and the result you can find in
the attached text file.
The Another strange problem that I have face during this exercise I
try to move the VM from one VMFS volume to another VMFS and the VMOTION result
was fail, and all of the VM folder and configuration files was removed
from source VMFS and also not copied on destination volume and the VM was not
able to power up again.
This behavior is so strange can any one help me to find out the
causes of this issue.
For Setup information I am using ESX server
3.5u2, Virtual Center
server is 2.5 and VCB is 1.5.
I would appreciate if you ignore the language mistakes.....Many Thanks in
advance
Regards,
Xzearik
