EUC Access Point 2.8 - BLAST not working

crp0499 — Thu, 23 Mar 2017 20:44:48 GMT

We have a new UAG install using version 2.8 and our Blast isn't working. All else is fine, and we even have the certificate installed. There is another post hinting that the complex password in the deploy script should be simple and ours is simple. PCoIP is working. The client works. Blast does not.

When accessing via Blast, we can login, we see the desktop but when we click the desktop, we just get a white or gray screen and nothing ever happens.

Our locked.properties file has the balancedhost entry in it with our VIPs IP address. Still no joy.

Does anyone have any ideas?

Thanks

Cliff

Re: EUC Access Point 2.8 - BLAST not working

markbenson — Fri, 24 Mar 2017 08:17:36 GMT

There are several possible causes of this. The common ones are:

1. Check your UAG/AP appliance blastExternalURL setting. e.g. httpss://ap1.myco.com:443. Make sure it references a hostname that can be resolved by the client to get to your UAG/AP appliance. If PCoIP is working then this hostname will the name that resolves to the IP address you used in the equivalent pcoipExternalURL.

2. If your blastExternalURL uses port 8443 instead of 443, then make sure your Internet facing firewall also allows TCP 8443 in.

3. If you have a firewall between the UAG/AP appliance and the virtual desktops and RDS Hosts make sure that allows TCP port 22443 from the UAG/AP appliance to any virtual desktop.

4. Make sure you don't have the option set in Connection Server to gateway Blast connections. The setting for Connection Server "Use Blast Secure Gateway ..." should be unticked.

5. If you use a load balancer, make sure it is set up correctly to ensure that this Blast connection from the client (on TCP 443 or 8443) gets directed to the same UAG/AP appliance as was used for the initial authentication. This is described in more detail here - Load Balancing across VMware Unified Access Gateway Appliances (formerly known as Access Point)

Let us know if any of these resolve this for you.

Mark

topic Re: EUC Access Point 2.8 - BLAST not working in Horizon Desktops and Apps

EUC Access Point 2.8 - BLAST not working

Re: EUC Access Point 2.8 - BLAST not working