topic Adding ESXi Hosts Via Natted IP and vCenter 6.5 in VMware vCenter™ Discussions

Adding ESXi Hosts Via Natted IP and vCenter 6.5

cliffcahill — Mon, 10 Jul 2017 19:14:26 GMT

Hey,

I'm having an issue at the moment adding ESXI hosts Via their Natted IP address to vCenter VCSA 6.5.

Previously I have successfully used this KB successfully Using NAT between the vCenter Server system and ESXi/ESX hosts (1010652) | VMware KB for all previous version of vCenter.

The Server IP address in the vpxa.cfg file is correct and port 902 is open and telnet works

I have increased the config.vpxd.heartbeat.notRespondingTimeout via this KB

https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005757

Here is a tail of the vxpa agent log

2017-07-10T19:00:41.341Z verbose vpxa[8ED0B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-376885b1] Received WaitForUpdatesDone callback

2017-07-10T19:00:41.341Z verbose vpxa[8ED0B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-376885b1] Applying updates from 479 to 480 (at 479)

2017-07-10T19:00:41.341Z verbose vpxa[8ED0B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-376885b1] Starting next WaitForUpdates() call to hostd

2017-07-10T19:00:41.341Z verbose vpxa[8ED0B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-376885b1] Completed WaitForUpdatesDone callback

2017-07-10T19:00:41.422Z verbose vpxa[8F54B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-2f2143e2] Received WaitForUpdatesDone callback

2017-07-10T19:00:41.422Z verbose vpxa[8F54B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-2f2143e2] Applying updates from 480 to 481 (at 480)

2017-07-10T19:00:41.422Z verbose vpxa[8F54B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-2f2143e2] Starting next WaitForUpdates() call to hostd

2017-07-10T19:00:41.422Z verbose vpxa[8F54B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-2f2143e2] Completed WaitForUpdatesDone callback

2017-07-10T19:00:42.268Z warning vpxa[8E8EB70] [Originator@6876 sub=Heartbeat opID=SWI-1c06dac8] Failed to bind heartbeat socket for host address 10.12.X.X: Cannot assign requested address

2017-07-10T19:00:45.946Z verbose vpxa[8F33B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-30efc29a] Received WaitForUpdatesDone callback

2017-07-10T19:00:45.947Z verbose vpxa[8F33B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-30efc29a] Applying updates from 481 to 482 (at 481)

2017-07-10T19:00:45.947Z verbose vpxa[8F33B70] [Originator@6876 sub=halservices opID=WFU-30efc29a] [VpxaHalServices] HostChanged Event Fired, properties changed [runtime.healthSystemRuntime]

2017-07-10T19:00:45.947Z verbose vpxa[8F33B70] [Originator@6876 sub=vpxaInvtHost opID=WFU-30efc29a] [HostChanged] Found update for tracked MoRef vim.HostSystem:ha-host

2017-07-10T19:00:45.947Z verbose vpxa[8F33B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-30efc29a] Starting next WaitForUpdates() call to hostd

2017-07-10T19:00:45.947Z verbose vpxa[8F33B70] [Originator@6876 sub=VpxaHalCnxHostagent opID=WFU-30efc29a] Completed WaitForUpdatesDone callback

2017-07-10T19:00:46.270Z warning vpxa[8E8EB70] [Originator@6876 sub=Heartbeat opID=SWI-1c06dac8] Failed to bind heartbeat socket for host address 10.12.X.X: Cannot assign requested address

10.12.X.X is the host natted ip address.

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

AishR — Thu, 13 Jul 2017 10:38:32 GMT

VPXA.log is not sufficient. Can we also take a look at /var/log/vmkernel.log, var/log/hostd.log, /var/log/vmkwarning.log on the ESXi host that we are failing to add to vCenter? Also as per KB Using NAT between the vCenter Server system and ESXi/ESX hosts (1010652) , using NAT between vCenter and ESXi host is unsupported.

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

cliffcahill — Thu, 13 Jul 2017 13:55:43 GMT

Hi Aishr

thank you for replying - I'm aware it's not supported it a temporary connection in order to use VC to run some PowerCli over the temporarily connected hosts. I Managed to fix the issue afterward.

I had to create a new VMK with the natted IPaddress as the interface IP ie 10.12..X. Xand stability improved.

"Failed to bind heartbeat socket for host address 10.12.X.X: Cannot assign requested address" error were eliminated

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

pratha123 — Sat, 10 Mar 2018 14:01:41 GMT

Hi cliffcahill,

We are facing the same issue, Can you please share the steps you had done to resolve this issue ?

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

cliffcahill — Tue, 27 Mar 2018 20:11:36 GMT

Fix was to create a VMK on vSwitch. Use the ESXi host natted ip address as the VMK interface address. No vlan is required.

Hope this help.

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

ManivelR — Wed, 18 Sep 2019 13:33:16 GMT

cliffcahill

Yes.It worked.

In addition,we added this line as well.

1) We added this line in vpxa.cfg "<preserveServerIp>true</preserveServerIp>".After configuring this line,VC Public IP address will not be changed.

2) We added the NAT public IP address in vpxa.cfg "<serverIp>212.*.*.*</serverIp>"

3) And we created a new vmkernel port group(with new vSwitch and no VLAN,no nic binding needed) with ESXi NAT public IP address.

it worked well and thanks much for the inputs.

Thanks,

Manivel RR

topic Adding ESXi Hosts Via Natted IP and vCenter 6.5 in VMware vCenter™ Discussions

Adding ESXi Hosts Via Natted IP and vCenter 6.5

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

Re: Adding ESXi Hosts Via Natted IP and vCenter 6.5

cliffcahill​

cliffcahill