1 8 9 10 11 12 Previous Next 268 Replies Latest reply on Mar 13, 2009 7:11 AM by satish.lx Go to original post
      • 135. Re: for AMD-V
        DaveP Master

        Sorry should have mentioned that earlier when doing the research, you MUST have dual core or processor system.

        • 136. Re: VMWare Server inside VMWare Server
          DaveP Master

          Actually I was told by Petr(?) that there are actually things missing in WS5 code base from the public version that make it impossible to run ESX. VMware engineers had a special build which enabled it.

           

          Try it out though you will probably need these settings:

           

          isolation.tools.getPtrLocation.disable = "TRUE"

          isolation.tools.setPtrLocation.disable = "TRUE"

          isolation.tools.setVersion.disable = "TRUE"

          isolation.tools.getVersion.disable = "TRUE"

          monitor_control.disable_directexec = "TRUE"

          monitor_control.disable_chksimd = "TRUE"

          monitor_control.disable_ntreloc = "TRUE"

          monitor_control.disable_selfmod = "TRUE"

          monitor_control.disable_reloc = "TRUE"

          monitor_control.disable_btinout = "TRUE"

          monitor_control.disable_btmemspace = "TRUE"

          monitor_control.disable_btpriv = "TRUE"

          monitor_control.disable_btseg = "TRUE"[/code]

          • 137. Re: VMWare Server inside VMWare Server
            oreeh Guru

            Thanks !

            • 138. Re: for AMD-V
              Anders Expert

              I then moved the installation on my even older

              P3-1GHz machine which has 2 CPUs and I use this as a

              ESX host for my lab. On this machine the startup of

              VI3 went smoothly without any errors but it took 3hrs

              to display the console screen and it was not

              useable.

               

              10 points for persistance!!

               

              As previously stated VT is vital...

               

              \- Anders

              • 139. Re: VMWare Server inside VMWare Server
                veshi Lurker

                Unfortunately, I'm still getting the "You may not power on a virtual machine in a virtual machine" error, even after setting

                 

                isolation.tools.getVersion.disable = "TRUE"

                 

                I'll now try running the player in a VM.

                • 140. Re: VMWare Server inside VMWare Server
                  continuum Guru
                  Community WarriorsUser ModeratorsvExpert

                  To start a WS 6 inside a WS 6 I use

                  monitor_control.restrict_backdoor = "TRUE"

                  without any isolation.tools parameters

                  • 141. I can run ONE ESX vm but the second won't load the VMkernel
                    gshields Novice

                    I am getting the same errors that you've been getting Vliegenmepper associated with the "unexpected IRQ trap at vector bf" and the "running vmkernel built on \_Unknown_" error.  But, here's the weird part with mine.  I have created two ESX instances as VM's inside Workstation.  When I boot the first one, it boots just fine with the VMKernel loading just fine.  When I boot the second one, I start getting the errors.  The same happens if I boot them in reverse order.  The first one that gets booted works fine and the second won't work.

                     

                    Since we're seeing this "unexpected IRQ trap at vector bf" error, is it possible that they're trying to share a resource that they can't?  I'm running this on a PowerSpec X300 with an Intel Core Duo E6600, which is one of the newest Intel processors that does support the VT extensions.  The spec for this machine is at:  http://www.powerspec.com/systems/system_specs.phtml?selection=X300.  Does anyone know why I can successfully run one, but not two simultaneous ESX VM's in Workstation?  Is anyone else seeing this?

                    • 142. Re: VMWare Server inside VMWare Server
                      DaveP Master

                      Ulli

                       

                      I thought they were after running it on Server which is ~5.5.1 code. However, as you point out you can power on other VMware products inside WS6.

                       

                      Dave

                      • 143. Re: I can run ONE ESX vm but the second won't load the VMkernel
                        MayurPatel Expert

                        Although I have yet to get this working properly pending getting hold of a suitable machine.

                         

                        From the experience I have had, it could be that although your CPU supports VT, the motherboard either doesn't or it is currently disabled in the BIOS.

                         

                        Have a look.

                         

                        Message was edited by: I just noted that one ESX does run properly that means VT must be enabled.

                         

                        Are you able to run a VM on the ESX with ease? this would prove VT is working on your machine.

                         

                        This could be due to the fact the ESX VM requires a minimum of 2 CPU's therefore it cannot start the second ESX VM as you probably only have a single Dual core CPU.

                                MayurPatel

                        • 144. Re: I can run ONE ESX vm but the second won't load the VMkernel
                          gshields Novice

                          The CPU does support VT and I've made sure that its enabled in the BIOS.  The first VM boots fantastically fast (like 30-60 seconds).  The second one boots really fast as well, but I'm getting red text that flashes by before I can capture it -- then I get the error messages shown above.

                           

                          The two-processor possiblity might be going somewhere, but I was under the impression that Workstation should be abstracting those processors so both VM's can use them.

                           

                          Others on this thread have gotten 2x ESX servers running simultaneously.  Are you doing this with 2-CPU machines or 4-CPU machines?

                           

                          Thanks for any help you can provide with this.  I need to get these to work on a single machine for portability reasons (and VMotion...  I can't seem to VMotion machines to my laptop -- I'm getting a CPU register error there).

                          • 145. Re: I can run ONE ESX vm but the second won't load the VMkernel
                            kastro Enthusiast

                            Hi to all. I would also like to share my experiance. My setup is like this:

                            -IBM T60 with T7200 VT enabled CPU

                            -VMware Workstation 6

                            -I installed 2 ESX inside WS6 as instructed (VT enabled and e1000 ethetnet change in .vmx)

                            -one w2k3 VM for VC and iSCSI (StarWind 3.2.2 SW iSCSI)

                            -managed to install VM on iSCSI

                            -VMotion between two virtual ESXs on iSCSI

                             

                            All of this was instaled in isolated (Host only) network on WS6.

                             

                            For better performance I instaled ESX1 and ESX2 on external USB HDD, VM for VirtualCenter was instaled on internal laptop HDD.

                             

                            Will try now also HA and DRS.

                             

                            Bye

                            • 146. Vista?? WAS:Re: I can run ONE ESX vm but the second won't load the VMkernel
                              gshields Novice

                              For all that are successfully getting multiple instances of ESX to boot on the same host machine, are you using Windows XP as your host machine O/S or Windows Vista?

                               

                              I'm currently running all of this on Vista 64-bit -- with all UAC features disabled -- and I'm wondering if its still something within Vista that's causing my failures.

                              • 147. Re: Ability to run ESX as a Workstation guest
                                Ninjaboy_jr Lurker

                                I WANT THE DL380...  Let me know if it is still being offered!

                                • 148. Re: Ability to run ESX as a Workstation guest
                                  SanRam Hot Shot

                                  Hi All,

                                   

                                  I am trying to get this to work, but somehow unable to do so. Even though VT is enabled in the BIOS (I have an HP nc6400 with T5600 C2D proc), when I try to start the VM, it gives an error stating - "This CPU is VT-capable, but VT is not enabled. (Check your BIOS/firmware settings.)

                                  Module Monitor power on failed."

                                   

                                  The following is my .vmx file -

                                   

                                  config.version = "8"

                                  virtualHW.version = "4"

                                  numvcpus = "2"

                                  scsi0.present = "TRUE"

                                  scsi0.virtualDev = "lsilogic"

                                  memsize = "1024"

                                  scsi0:0.present = "TRUE"

                                  scsi0:0.fileName = "ESX001.vmdk"

                                  ide1:0.present = "TRUE"

                                  ide1:0.fileName = "D:"

                                  ide1:0.deviceType = "cdrom-raw"

                                  floppy0.autodetect = "TRUE"

                                  ethernet0.present = "TRUE"

                                  ethernet0.virtualDev = "e1000"

                                  ethernet0.connectionType = "bridged"

                                  ethernet0.addressType = "generated"

                                  ethernet0.wakeOnPcktRcv = "FALSE"

                                  svga.autodetect = "TRUE"

                                  mks.keyboardFilter = "allow"

                                  displayName = "ESX001"

                                  guestOS = "redhat"

                                  nvram = "Red Hat Linux.nvram"

                                  deploymentPlatform = "windows"

                                  virtualHW.productCompatibility = "esx"

                                  tools.upgrade.policy = "useGlobal"

                                  monitor_control.restrict_backdoor = TRUE

                                  monitor_control.vt32 = TRUE

                                   

                                  ide1:0.autodetect = "FALSE"

                                  floppy0.fileName = "A:"

                                  isolation.tools.hgfs.disable = "TRUE"

                                   

                                  ethernet0.generatedAddress = "00:0c:29:4a:bd:30"

                                  uuid.location = "56 4d 0b 78 7d b7 73 36-43 66 e0 21 e8 4a bd 30"

                                  uuid.bios = "56 4d 0b 78 7d b7 73 36-43 66 e0 21 e8 4a bd 30"

                                  scsi0:0.redo = ""

                                  ethernet0.generatedAddressOffset = "0"

                                  floppy0.startConnected = "FALSE"

                                   

                                  ide1:0.startConnected = "FALSE"

                                  /code

                                   

                                  Can you please help me figure out what is wrong and how I can get this working?

                                   

                                  Thanks in advance!

                                  • 149. Re: Ability to run ESX as a Workstation guest
                                    oreeh Guru

                                    did you power off after enabling VT?

                                    1 8 9 10 11 12 Previous Next