I am going to test the vm(autoinfo) with linked clones in Horizon 7.12.
and I have taken several steps, including reviewing the dns and all the settings and installing a new upper vm.
However, in a linked clone desktop pool, the vm does not proceed with customizing.
I installed all the programs related to Horizon in the latest version.
please help me!
I have been suffering from this problem for two weeks.
---------------
A- Lunch the VCSA Web Console on the vCenter GUI and see what (STATIC) IP was configured.
B- Open the DNS server and only keep that (STATIC) VCSA IP, then delete the other 2 records. Assuming you don't have vCenter HA enabled.
C- Verify that the right A records for the VCSA are created for forward & reverse look up zones.
D- Make sure that the VCSA FQDN match your DNS records. From the appliance & DNS server.
E- PING both VCSA IP/FQDN Back-and-forth from VCSA to Connection server & Connection server to VCSA.
E- Finally, try to access the VCSA by the FQDN. Use different machine and locations. If you got it properly showing once then check that end point device not showing it.
--------------
You need to integrate your AD domain with vSphere "Identity Source" option on the vCenter.
--------------
You need to create a service account for VDI.
If possible set up a Certificate Authority (CA) server.
If you don't have the proper Microsoft Windows License for the master image... You will not be able to recompose and create clones.
i checked dns server and ping test with ip & fqdn from connection server.
and ping test is great
but i can't access vcenter with dns vcenter.ws1.com
i think my horizon error caused by vcenter error.
It seems to me that Horizon is not able to handle dns information.
and i'm looking for find vcenter log.
Even if I log in to vcenter with an ip address, the session continues to break.
i did "Identity Source" and ad domain
vcenter management's service tab show me vmware vcenter server [vCenter Server health is GREEN vc.health.error.dbjob2]
When deploying a vCenter Server Appliance (VCSA), you have two options for setting up a static network address: using either a hostname (Fully Qualified Domain Name) or just a static IP Address (e.g. no DNS). when a static IP Address is used, a DNS server is not required because we are NOT using an FQDN for the hostname but rather an IP Address. What option you selected?
Try like this: https://VCSA-FQDN/vsphere-client/?csp
i forgot the config.
and i'm in home
in korea, today is friday.
thanks your help
i will check the option.
Thank you for your kindness really....
i reinstalled vcenter
and in vcenter install progress, i entered dns name, not blank
and After the Horion installation process, i succeeded that deploy the vm!
all system is normal!
thank you !