VMware Cloud Community
ronmanu07
Enthusiast
Enthusiast
‎03-05-2012 03:43 AM

LUN is not registered (no active paths)

Hi All,

I have a 2 node esxi 4.1 cluster and I just created 4 snapshots from my HP EVA and presented the snapshots to this cluster, one presented fine and the other 3 are giving me this error in the logs and I cannot see the LUNs:

WARNING: NMP: nmpPathClaimEnd: Device, seen through path vmhba4:C0:T1:L205 is not registered (no active paths)

Any help would be greatly appreciated.

Cheers, Val.

Reply
0 Kudos
2 Replies
ronmanu07
Enthusiast
Enthusiast
‎05-08-2012 06:40 PM

This was resolved by un-presneting the LUN's rebooting the hosts and re-presenting the LUNs.

Reply
MMosaadObaid
Contributor
Contributor
‎01-17-2020 12:28 PM

The same issue appeared, the cause was the LUNs are mapped for redundancy but recover-point is unpresenting them for replication

2020-01-17T19:19:31.968Z cpu11:32960)WARNING: NMP: nmpPathClaimEnd:1205: Device, seen through path vmhba3:C0:T2:L62 is not registered (no active paths)

2020-01-17T19:19:31.969Z cpu11:32960)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1099: Could not select path for device "Unregistered Device".

2020-01-17T19:19:31.969Z cpu11:32960)WARNING: NMP: nmpPathClaimEnd:1205: Device, seen through path vmhba3:C0:T2:L61 is not registered (no active paths)

2020-01-17T19:19:31.971Z cpu11:32960)WARNING: vmw_psp_rr: psp_rrSelectPathToActivate:1099: Could not select path for device "Unregistered Device".

Reply
0 Kudos