2 people found this helpful
Upgrade directly from 6.7u2 to the new patch in one step. Do not upgrade to 6.7u3 and then to the new patch as a second step.
working now with now patch
Brand new here ( as in about 1 hour ) I have an HP machine that I would like to install Vsphere on. As an evaluation customer I do not appear to be able to download the U2 release. only the current U3 which wont boot. How can I apply the path to the Vshphere installation media so I can install it?
Just to be sure: did you try 6.7u3 on the HP machine and see the failure discussed in this thread? I haven't heard of the issue affecting an HP machine before, so just for our information, can you say what model it is, and the BIOS version?
As a development engineer, I'm not familiar with what we do and don't make available to evaluation customers or what support channels are available to them. I can try to find you some help, but if there is a support or sales support contact associated with your evaluation, that might be a better route. The best thing probably would be if support can let you run your evaluation with 6.7u2 for now.
6.7ep13 wasn't released with an ISO image; that's planned for the next regular patch (not express patch).
The machine is an HP z420 workstation Intel Xeon E5 1650V2 and 16G ram.
bios version is J61 v03.86
multi-processor is enabled
hyperthreading is enabled ( this has to be enabled or hyper v will not install )
I copied the 6.7.u3 iso contents onto a usb drive and did a UEFI boot.
the machine loads some files and then displays the fatal error.
Just FYI I also used the exact same usb drive later and sucessfully installed onto a poweredge r710, UEFI enabled.
So as an evaluation user I
1) Cannot download 6.7 u2 as its not an allowed product for whatever reason
2) Cannot install 6.7 u3 because of the error.
3) am dead in the water
( edit added bios version and some other settings which I forgot )
@Himilou: I've sent out some email internally to try to find who could help, perhaps by giving you access to 6.7u2.
In the meantime, you could try updating to the latest BIOS. From HP Z420 Workstation Software and Driver Downloads | HP® Customer Support , I see the latest is 03.95 Rev A, dated Jul 1, 2019. That shouldn't hurt, but of course may not help.
@Himilou: Your machine isn't on our compatibility list (VMware Compatibility Guide - System Search ), so our evaluation program doesn't really apply. However, you can try the free version of vSphere at Free vSphere Hypervisor | VMware . I checked, and if you register for the free version, you do get the option to download older releases like 6.7u2, not only 6.7u3. I hope that helps.
Anyone know why the 6.7u3 image on the Hypervisor free page is still the one from 20/08/2019? Can only upgrade to 6.7u2....
how to this issue