after enable passthrough and add the PCI device to VM-Host Crashed PSOD

[Rao9339]

Hello Every one,

HBA card is enabled  pass through on ESXi 5.5 Host and  it was added as PCI device to the VM(windows2008).setup is running running since long time.successfully.

Now we have new ESXi 6.7 host, same VM migrated to new Host 6.7 and one of the HBA card from the host has enabled pass thorough and it was added as PCI device to the VM(windows2008).

all went good but when ever guest VM(windows) reboots , host is crashed PSOD.Please help me, what needs to be done to prevent the host PSOD, wen Guest VM reboots.

[KocPawel · Accepted solution]

Usually PSOD is caused by wrong firmware or driver version.

Could ou check you hba firmware version?

VMware Knowledge Base

And then we need to check it on compatibility matrix, maybe there is a known issue.

Check also output from this:

esxcli  storage core adapter list

vmkchdev -l |grep vmhba3 example: vmkchdev -l |grep vmhba0