I have a 9260-8i and I have not updated from 9.5U1 because of the lack of legacy RAID controller support with newer versions of vSphere.
Can someone please chime in and tell us if 9.7U3 and LSA for 9260-8i provides enough features to actually be viable? Does it monitor and send email alerts about disc & battery issues? Can it maintain (discharge/recharge) the BBU like MSM does with 9.5U1?
Mine is: Version:007.010.007.000, for Win x86 and x64. And the latest/current version is 007.011.006.000. LSA has several option during installation, and I chose 'Gateway....'. Once done, double-click the LSA icon on your Win-Desktop, and your browser will open a new tab to launch the service. Then input the right IP to discover your ESXi host and it will show up if all is in order. Use your ESXi host's username/password to login.
Please make sure the IP addresses of both of your ESXi host and Windows Workstation are in the same IP segment, e.g., 192.168.1.0/24. If there is a need, you may add an line in your Windows 'hosts' file(C:\Windows\System32\drivers\etc\):
Excellent! I upgraded from 6.5U1 to 6.7U3 this past weekend and found that I couldn't check my raid device status. I downloaded the LSA software, installed it on Win7 (yes it installs on Win7 even though it doesn't list it as supported), and it all just worked with the stock lsi_mr3 and lsiprovider drivers that were installed by the 6.7U3 update process. Looks like all the functionality that was present in the old Megaraid Storage Manager is here, and the bonus is that there isn't a fight each time getting the software to find the ESXi server.
P.S. Has anyone gotten the email alerts to work? I can't seem to get it to send any emails. When I click test, it just comes back and nothing happens. I run my own email server and I can verify that it saw nothing. If I deliberately put in a bad IP address it says that it can't send the mail, so it's doing something.
I got email working just fine.
Test it again while monitoring with sysinternals might shed some light on it...
i tried this CIM Provider
once i test to take Disk down > vCenter alerts but there is no Sensor. Need to go to the Host Client view. there i see an Storage Section.
that looks usefully
what i'am trying now is Remote checking Health through the wbem sfcbd Service.
but i don't find the correct CIM Classes
those worked with 6.0. Zero Info back with 6.7
VMware_SASSATAPort = Controller Ports
VMware_StorageVolume = Raid Status
VMware_StorageExtend = Disk Online Status
Anyone may knows the right CIM Classes to get above checked remotely?