VMware Cloud Community
suhag79
Hot Shot
Hot Shot

Random VM disconnection issue on vSAN Cluster

Hi all -

We have 4 Node  VMware ESXi, 6.5.0 vSAN cluster.  After upgrading to  ESXI 6.5 14320405 patch, we are getting random VM disconnection issue on vSAN cluster.

Can anyone help on this.

Thanks,

2 Replies
tayfundeger
Hot Shot
Hot Shot

Hi,

The problem you are experiencing may be related to firmware or driver. What hardware do you use? Also does vmkernel.log show a warning? Did you check?

--
Blog: https://www.tayfundeger.com
Twitter: https://www.twitter.com/tayfundeger

vBlogger, vExpert, Cisco Champions

Please, if this solution helped your problem, "Helpful" if it solves your problem "Correct Answer" to mark.
suhag79
Hot Shot
Hot Shot

Thanks for reply.

We are using CISCO UCS C240 M4SX. Will check vmkernel.log.

Just to add, we have all 1G Eth interface NIC card with below drive and firmware version. I was checking CISCO compatibility matrix Cisco UCS Hardware Compatibility List However, could not found 1G NIC driver version.

  Advertised Link Modes: Auto, 1000BaseT/Full, 100BaseT/Full, 10BaseT/Full

   Auto Negotiation: false

   Cable Type: Twisted Pair

   Current Message Level: 0

   Driver Info:

         Bus Info: 0000:01:00:0

         Driver: igbn

         Firmware Version: 1.63.0:0x80000e78:0.385.8

        Version: 0.1.1.0

   Link Detected: true

   Link Status: Up

   Name: vmnic10

esxcli software vib list | grep igbn

igbn                           0.1.1.0-4vmw.650.3.96.13932383        VMW                 VMwareCertified   2019-10-08

0 Kudos