Hello.
I have upgraded my ESXi 6.5 U2 to U3 and got troubles. No more monitoring for LSI Magaraid SAS 9260-4i.
And I see in Event this warning "An application (/bin/sfcbd) running on ESXi host has crashed (1417 time(s) so far). A core file might have been created at /var/core/sfcb-LSIESG_SMI-zdump.000"
I don't know how solve this issue.
Hi,
Which driver are you using?
For ESXi 6.5 U3 and the LSI 9260-4i, you should use megaraid_sas version 6.603.55.00-2vmw.
esxcfg-scsidevs -a
vmkload_mod -s mptspi |grep Version
I use megaraid_sas
[root@static:~] esxcfg-scsidevs -a
vmhba0 vmw_ahci link-n/a sata.vmhba0 (0000:00:1f.2) Intel Corporation Wellsburg AHCI Controller
vmhba1 megaraid_sas link-n/a unknown.vmhba1 (0000:02:00.0) LSI / Symbios Logic MegaRAID SAS GEN2 Controller
[root@static:~] vmkload_mod -s megaraid_sas |grep Version
Version: Version 6.603.55.00.2vmw, Build: 4564106, Interface: 9.2 Built on: Oct 26 2016
I also have the same issue.
My card is LSI MR9261-8i.
Monitoring used to work before upgrading to ESXi 6.5 U3.
Now I see "No data available".
Remote "storcli" command works and I can read RAID info.
Has anybody managed to solve the issue?
Have you got this working?
What is the higher build that works for you?
There is a similar thread here:
The build when it was working was 8294253.
Actually I have another host where everything is fine.
The difference is that on the second host I installed Update 3 right after installation from ISO.
On the first one, where I have issues, I installed the Update 3 after VMs deployment and couple months of usage.
Looks like something wrong happens during update.
I'm using a new install from the ISO, but then I restore a backup (ConfigBundle).
Anyway, I just tried Build 8285314, it works.
Tried also:
- Build 8294253, it provides the info in the ESXi web console, however, when I try to connect with the MSM, the host is not detected ... so I'm going to downgrade to 8285314.