As far as I can tell, the smis provider seems to work better with 6.7 u3
- the provider doesn't crash on ESXi
- the ESXi web ui shows storage information
However, so far this information doesn't show up in vCenter so I still don't know if a disk failure would get detected via vCenter alerts.
Oh, and LSA can talk to the host!
I have even been able to add multiple ESXi to a single LSA, which I think was an issue a couple months ago.
Does it also communicate with MSM again?
That's too bad... Stuck on 6.5 then...
1 person found this helpful
6.5 U2 works with MSM
6.5 U3 you have to use LSA instead of MSM
6.7 until U3 doesn't works with LSI provider at all
6.7 U3 works with LSA
I don't see the reason being stuck on 6.5 U2
And, just to be sure, this is with the latest smis-provider (mr7.9 - 00.73.00.02)?
1 person found this helpful
I must be doing something wrong.
I have installed the SMIS provider as stated.
I tried grabbing the latest version of LSA I could find, 4.012.000.000 and it picks up my esxi server intially during discovery, but then when I try to login to it with root, I am told that the user account does not have write permission. After restarting the computer with LSA installed, it no longer picks up my esxi server through discovery and I cannot find a way to manually add the server by ip.
Try to turn off the firewall.
I did try turning off the firewall and that didn't work.
I was able to get it working by using version 5.x of LSA. It then allowed me to login to my esxi server and change the settings of the controller.
I played around with it for a little bit, but it seems like they have a lot more they need to improve upon because I could not do nearly as much as you can with MSM and storcli.
The storage monitor of the WebUI of my 6.7 U3 server doesn't work still, but the LSA works pretty fine with U3. And I really don't know what wrong it is after many attempts to try to update both of the driver & SMIS provider were all failed. I even had my 6.7U3 re-installed.
FYI, mine is MegaRAID 9260-8i.
I am having the same issues with my LSI Controller (9266-8i) and the latest ESXi Version that worked for me was 6.5 Update2 .
May I ask you how you have managed to see Controller/HDD Infos in ESXi Environment?
I have used the lateset SMIS Provider Latest SMIS Providers from Broadcom Site but I still cannot see anything in VMWare Console.
Is there a Workaround or am I doing something wrong.
I am using a LSI 9266-8i Controller in my Homelab Server.
To my experience, for those legacy products like my 9260-8i, you may NOT be able to see any Controller/HDD info via the WebUI (refer to my screenshot). BUT, you may alternatively use LSA(LSI Storage Authority) instead, the substiution of MSM, to remotely manage/monitor your RAID controller, provided your ESXi server is 6.7 Update3(or above).
This is so far I can do after many attempts to try to make it work were all failed. Hope VMware will resolve this problem at the next release/patch.
Tell me please, wich version of LSA is work for you?
I have ESXi 6.7U3 and try many versions of LSA, but cant login to host with error "getClass: classname VMware_UserAuthorizationService not found" in syslog.