Hi there,
I have installed ESXi 6.5 update2 on 2 equal Cisco UCS M3 (UCSC-C220-M3SBE) with the same exact hardware configuration and same disks model/configuration but I see on server 2 that the installation have formatted the datastore1 with VMFS5 instead of VMFS6. Installation on server1 is correct with datastore1 formatted with VMFS6.
I have read in regards of the different VMFS depending on the disks version 512n or 512e but I do not understand why 2 exact servers are being installed with a different VMFS.
The only difference I have noted is the bios version on both servers:
Server1: C220M3.2.0.1b.0 (Build Date: 05/26/2014) --> Installed with default VMFS6
Server2: C220M3.2.0.3.0 (Build Date: 08/01/2014) --> Installed with default VMFS5
Any of you have encountered the same issue as mine and got a clarification from VMware?
Thank you!
Gabri
Welcome to the Community,
I assume that you are talking about the automatically created VMFS partition on the installation disk!?
Can you confirm that both hosts were installed (fresh installation, i.e. no upgrade/reinstall) using the same ESXi version/build. At least the first ESXi 6.5 builds still formatted the VMFS partition as VMFS5.
André
Hi Andre',
Correct, I have installed on both servers a fresh ESXi 6.5 update2 version and I am referring to the default datastore1 created with the installation disk.
Thank you,
Gabri