Hello together,
hopefully one of you have an Idea whats going on with this blade:
HPE ProLiant BL460c Gen9 - 32 GB SD-CARD - try to install with the following isos:
VMware-ESXi-6.5.0-Update1-5969303-HPE-650.U1.10.1.0.14-Jul2017
VMware-ESXi-6.5.0-5310538-HPE-650.10.1.0.47-Jul2017
VMware-ESXi-6.5.0-OS-Release-5146846-HPE-650.9.6.5.27-May2017
I got everytime the message:
vmkctl.HostCtlException: Unable to get node: Sysinfo error: Not foundSee VMkernel log for details
In the Attachment you find a lot of screenshots. Maybe one of you have an Idea.
Thanks for helping me!
Best regards
Sven-Jendrik
I ran into this exact issue on Dell FC630's in a FX2 enclosure.
Long story short, I had to reseat the blade (gave it like 5 minutes to drain residual power).
Long Story here:
Zsoldier's Tech Blog: VMware: physical vmnic# not showing up after upgrade...
Could you please upload vmkernel logs for the time error occurred.
I ran into this exact issue on Dell FC630's in a FX2 enclosure.
Long story short, I had to reseat the blade (gave it like 5 minutes to drain residual power).
Long Story here:
Zsoldier's Tech Blog: VMware: physical vmnic# not showing up after upgrade...
Hi,
small update, it was a issue with the SD Card / Mainboard in the Blade.
We replaced the SD Card and Mainboard.
R\SJT