Hello.
NAT64 is supported by NSX Edge in NSX 6.4, but NAT 46 and NAT 66 are not supported?
· About NAT 64
It seems NAT 46 and NAT 66 are not supported as below link also: (Since it is before 6.4 release, NAT 64 also noted not to be supported)
https://www.vmbaggum.nl/2017/01/nsx-ipv6-support/
NSX Edge | |||
Management IP | IPv4, IPv6 | No DHCPv6 support | |
Syslog | IPv4, IPv6 | Export to IPv4 and IPv6 Syslog servers | |
Interface IP | IPv4, IPv6, DS | No DHCPv6 support | |
DNS | IPv4 | ||
DHCP | IPv4 | ||
Static Routing | IPv4, IPv6 | ||
Dynamic Routing | IPv4 | No OSPFv3 or MP-BGP support | |
Firewall | IPv4, IPv6 | ||
Load Balancer | IPv4, IPv6 | Transparent Mode IPv4 VIP w/ IPv4 Pool (L4 & L7) IPv6 VIP w/ IPv6 Pool (L4 & L7) SNAT Mode | |
NAT | IPv4 | NAT64, NAT 46 and NAT66 are not supported | |
IPSEC | IPv4, IPv6 | No IPv4 Peers with IPv6 internal subnet support | |
SSL VPN | IPv4, IPv6 | IPv4 and IPv6 can be used for outer packet (tunnel level) but IPv4 only for inner packet | |
L2VPN | IPv4, IPv6 | IPv4 and IPv6 can be used for outer packet (tunnel level) but IPv4 only for inner packet |
It seems NAT 46 and NAT 66 are not supported as below link also: (Since it is before 6.4 release, NAT 64 also noted not to be supported)
https://www.vmbaggum.nl/2017/01/nsx-ipv6-support/
NSX Edge | |||
Management IP | IPv4, IPv6 | No DHCPv6 support | |
Syslog | IPv4, IPv6 | Export to IPv4 and IPv6 Syslog servers | |
Interface IP | IPv4, IPv6, DS | No DHCPv6 support | |
DNS | IPv4 | ||
DHCP | IPv4 | ||
Static Routing | IPv4, IPv6 | ||
Dynamic Routing | IPv4 | No OSPFv3 or MP-BGP support | |
Firewall | IPv4, IPv6 | ||
Load Balancer | IPv4, IPv6 | Transparent Mode IPv4 VIP w/ IPv4 Pool (L4 & L7) IPv6 VIP w/ IPv6 Pool (L4 & L7) SNAT Mode | |
NAT | IPv4 | NAT64, NAT 46 and NAT66 are not supported | |
IPSEC | IPv4, IPv6 | No IPv4 Peers with IPv6 internal subnet support | |
SSL VPN | IPv4, IPv6 | IPv4 and IPv6 can be used for outer packet (tunnel level) but IPv4 only for inner packet | |
L2VPN | IPv4, IPv6 | IPv4 and IPv6 can be used for outer packet (tunnel level) but IPv4 only for inner packet |
Thankyou!